Top of the page

Red wapa wood tone adhesive paper

  • Available
  • Product number : BOIS3-2204

Made to order

122 cm

Add 1.5 ml and benefit from-1%.

25,07 or € then 2 x

Highlights

comfort

  • Easy to install
  • Economic
  • Realistic
Read more
Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

Detailed description

This imitation rosewood film is a thermoformable adhesive coating that can be easily applied to any object of your choice (the surfaces to be covered must not be porous). This adhesive film has a dark base colour with large or small vein patterns in dark brown.

The adhesive coating is an inexpensive way to personalise your interior.

Dressing your furniture and walls with this adhesive is easy! Thanks to the honeycomb structure of the adhesive, air bubbles can be removed with a felt fluffer without a hitch. You can therefore count on a very quick and easy application of the decorative coating without any work being required. In addition, this adhesive coating is thermoformable. When heated, the adhesive adapts to the surface on which it is applied, and in particular to all the shapes of the furnishings. With the installation of this decorative adhesive, you save on average 50% compared to a classic renovation.

To give your walls or furniture a new lease of life, count on this high-quality vinyl with excellent resistance to water, dirt, abrasion, UV and wear. Thanks to its thickness, this adhesive also hides small imperfections. Rated A+ in the C.O.V. test and M1 in the fire test, this coating can be installed in an open public area.

Durability: 10 years in interior installation (anti-cracking, flaking, delamination and yellowing)

In order to get an idea of the quality and the real look, we advise you to request a free sample.

See more details

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Compare products

  • Type of installation
  • Relief
  • Trend
  • Thermoformable
  • Air Flow Technology
  • Reviews

Made to order in our workshop in France

Map of France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Preparing an order in the workshop
Preparing an order in the workshop

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

** Unit price for the purchase of the largest quantity.

Frequently asked questions

  • Can the adhesive coating be removed without damaging the furniture underneath?

    You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.

    Our tip for removing adhesive coatings:

    • Start from a corner and pull fairly firmly
    • Use a release solution to cancel out the glue's action
    • Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.
  • Can adhesive coating be applied to a raised surface?

    Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.

    If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.

  • Can adhesive coating be applied to tiles?

    The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.

    For a more aesthetic look, there are two solutions:

    • Smooth the surface with a smoothing compound beforehand
    • Cut tiles to size and reapply a clean grout over them
  • How do I apply adhesive coating in corners?

    For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references
-

No reference selected.
To select new samples, go to the product pages.

See my selection of samples

Samples