Top of the page

Anthracite grey wood-effect decorative adhesive film

  • ***** / 5 See reviews
  • Available

  • Product number : ACCESS-7016

Made to order

Enter your dimensions in centimetres (cm). To specify in millimetres, add a comma. (example: 15.4 cm)

cm
cm

Minimum billing of 0.4 m² per cut

Freeshipping

Highlights

access

  • Anthracite grey adhesive wood imitation coating
  • Texture textured touch
  • Practical for easy customisation of your furniture and walls
  • Ideal for a contemporary style of decoration
  • Excellent alternative to paint
Read more
Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

Detailed description

With a slight satin finish, this anthracite grey imitation wood adhesive will give you a unique and original decoration that is sure to make an impact! Apply it easily to your walls or furniture to obtain an incredible result in a few minutes. Don't think about getting your hands dirty and struggling to achieve a clean and precise result, opt instead for this anthracite wood effect coating which guarantees an impeccable result even if you are not very handy!

Please note that the ACCESS range of adhesive coatings are considered to be moderately sensitive to thermoforming. In fact, we advise you to use them on flat or slightly curved surfaces. For difficult corners and angles, we recommend that you choose a decorative adhesive from the COMFORT or EXCLUSIVE range.

Standards: all ACCESS decorative adhesives are not subject to the following standards and certifications: M1 fire rating, CE, IMO, MED, RAIL, REACH, TCHIBO, TABER TEST, VOC. Do not hesitate to read the technical data sheet or to contact our advisors for any questions concerning the standards of these adhesive coatings.

Durability: 5 to 8 years in interior installation (anti-cracking, flaking, delamination and yellowing)

In order to get a feel for the quality and the real look, we advise you to request a free sample.

See more details
Installation instructions Technical data

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Made to order in our workshop in France

Map of France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Preparing an order in the workshop
Preparing an order in the workshop

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

** Unit price for the purchase of the largest quantity.

You'll also like

4 similar reference(s)

* price per m² for the purchase of a full roll of the largest width.

What our customers say

  • *****

    Il y a 498 jours

    Good thickness and easy to install

  • *****

    Il y a 536 jours

    Easy to install, holds well, no bubbles, looks like a sheet of wood

Frequently asked questions

  • Can the adhesive coating be removed without damaging the furniture underneath?

    You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.

    Our tip for removing adhesive coatings:

    • Start from a corner and pull fairly firmly
    • Use a release solution to cancel out the glue's action
    • Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.

  • Can adhesive coating be applied to a raised surface?

    Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.

    If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.

  • Can adhesive coating be applied to tiles?

    The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.

    For a more aesthetic look, there are two solutions:

    • Smooth the surface with a smoothing compound beforehand
    • Cut tiles to size and reapply a clean grout over them

  • How do I apply adhesive coating in corners?

    For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references -

No reference selected.
To select new samples, go to the product pages.

Envoyer ma demande

See my selection of samples

Samples