Top of the page

Decorative coating with medium oak wood effect

  • ***** / 5 See reviews
  • Available
  • Product number : BOIS2-2124

Made to order

Or enter your own measurements

Add 4.96 ml and save 10%.

292,55 -3%

282,75 or € then 2 x

Attention : les films dépassant 60cm de largeur seront en plusieurs parties.

Highlights

comfort

  • Adhesive coating with medium oak wood effect finish
  • Textured touch for a realistic effect
  • Natural appearance
  • Ideal for a contemporary style with its medium oak wood finish
  • Excellent alternative to paint to personalise your furniture and walls
Read more
Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

Also available in

Detailed description

Personalise all your walls and furniture with this beautiful decorative wood imitation medium oak adhesive. You will be pleasantly surprised by its textured look which gives an extra touch of realism to this coating. You can use it on any non-porous surface and its air flow technology will give you an easy and quick application. The adhesive part of the film is equipped with micro channels that allow air to flow out more easily during the application process and thus avoid bubbles.

You will be seduced by this real wood look which will bring a warm and pleasant touch to any type of decoration, on your furniture and your walls, in any place!

To give your walls or furniture a new lease of life, count on this high-quality vinyl with excellent resistance to water, dirt, abrasion, UV and wear. Thanks to its thickness, this adhesive also hides small imperfections. Rated A+ in the C.O.V. test and M1 in the fire test, this flooring can be installed in a public open area.

Durability: 10 years in interior installation (anti-cracking, flaking, delamination and yellowing)

In order to get an idea of the quality and the real look, we advise you to request a free sample.

See more details

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Made to order in our workshop in France

Map of France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Preparing an order in the workshop
Preparing an order in the workshop

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

** Unit price for the purchase of the largest quantity.

You'll also like

11 similar reference(s)

* price per m² for the purchase of a full roll of the largest width.

What our customers say

  • *****

    Il y a 377 jours

    Speed. Ease and variety of choice

  • *****

    Il y a 574 jours

    J relooked my living room table

    Wood effect to break the nose!

  • *****

    Il y a 679 jours

    The film tore a bit when we took it off its protection so it was a bit more fragile than we thought and unfortunately it's visible on the table we covered. It was also hard to avoid bubbles, but the final result was really nice. We are satisfied!

Frequently asked questions

  • How to install adhesive coating yourself?

    All the steps and tips to follow can be found in our article "How to install an adhesive coating?"

  • Can the adhesive coating be removed without damaging the furniture underneath?

    You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.

    Our tip for removing adhesive coatings:

    • Start from a corner and pull fairly firmly
    • Use a release solution to cancel out the glue's action
    • Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.
  • Can adhesive coating be applied to a raised surface?

    Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.

    If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.

  • Can adhesive coating be applied to tiles?

    The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.

    For a more aesthetic look, there are two solutions:

    • Smooth the surface with a smoothing compound beforehand
    • Cut tiles to size and reapply a clean grout over them
  • How do I apply adhesive coating in corners?

    For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references
-

No reference selected.
To select new samples, go to the product pages.

See my selection of samples

Samples