Vintage green slate effect magnetic board film
- ***** / 5 See reviews
- Available
-
Product number : TB-3915
Highlights
- Magnetic board effect film
- Vintage green slate chalkboard style
- Compatible with traditional and liquid chalk
- Easy to wipe off with a sponge
- Adds creative space to your home
followed by 2 monthly payments
for a total of : Of which expenses
Detailed description
Go back to school with this green chalkboard with our adhesive film effect vintage green slate magnet board! It'll stimulate your creativity, inviting you to write, draw, play, make guesses, or simply display your favorite photos!
This film is composed of a ferrous film and a PET film, with a thickness of 500 μm. Its magnetic characteristics have been improved for better element retention.
Ideal for creative spaces, its 120 cm height allows you to install a large rectangle as if it were a school picture. But you're free to cut it to any shape you like - it cuts beautifully! You can easily place it on any smooth, non-porous surface, thanks to its "bubble-free" adhesive system. This allows air to escape easily during installation, preventing the formation of bubbles.
Important note: This film is to be laid dry. Please note that magnetic films are heavier: we therefore strongly recommend that you lay the film flat 24 hours before application to limit shape memory.
Use: Compatible with traditional and liquid chalk. The ideal way to care for magnetic green slate board film is to clean it weekly with a sponge and a little soap. To avoid leaving a permanent mark, please erase writing up to 1 month after creation.
Reference : TB3915
Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.
Compare products
- Type of installation
- Relief
- Trend
- Thermoformable
- Air Flow Technology
- Reviews
* price per m² for the purchase of a full roll of the largest width.
Made to order in our workshop in France
Our products are printed and cut in our workshop in Villars-les-Dombes.
We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is
made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our
free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!
Tuto: need help with installation?
DOWNLOAD
Installation instructionsTools for easy installation
Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!
You'll also like
8 similar reference(s)
* price per m² for the purchase of a full roll of the largest width.
What our customers say
Frequently asked questions
-
How to install adhesive coating yourself?
All the steps and tips to follow can be found in our article "How to install an adhesive coating?"
-
Can I put adhesive coating on my worktop?
Yes, it's possible. Our coatings are thick, moisture-resistant and very easy to clean. There are a few precautions to take, such as using trivets. Find out more in our blog post "Can adhesive flooring be installed on a kitchen worktop?"
-
Can the adhesive coating be removed without damaging the furniture underneath?
You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.
Our tip for removing adhesive coatings:
- Start from a corner and pull fairly firmly
- Use a release solution to cancel out the glue's action
- Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.
-
Can adhesive coating be applied to a raised surface?
Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.
If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.
-
Can adhesive coating be applied to tiles?
The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.
For a more aesthetic look, there are two solutions:
- Smooth the surface with a smoothing compound beforehand
- Cut tiles to size and reapply a clean grout over them
-
How do I apply adhesive coating in corners?
For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".
Entrust installation to our professionals
Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.
Your sample list
Free samples are limited to 3 references
-
No reference selected.
To select new samples, go to the product pages.
See my selection of samples
Samples