Top of the page

Glossy whiteboard film for Velleda erasable markers

  • Available
  • Product number : TB-3913

Made to order

Add 2.3 ml and benefit from-3%.

27,44 or € then 2 x

Highlights

  • Glossy whiteboard effect film velleda
  • Compatible with erasable markers
  • For use on all smooth, non-porous surfaces (walls, desks, furniture...)
  • Easy to wipe off with a sponge
  • Easy to cut: Customize your film
Read more
Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

Detailed description

Write your ideas down with our glossy white erasable board effect film! A creativity booster, it will accessorize your kitchen, office or any other room to add effective, useful decoration.

This ultra-versatile film gives you thousands of ideas for using it: writing a shopping list, magnetizing drawings, making a reminder, helping children with lessons, drawing, playing, etc. The only limit is your imagination :) Simply apply to a smooth, clean, non-porous surface. Just like conventional adhesive coatings.

Its new composition makes it more resistant (100µm). Its height of 1.52 m is virtually identical to that of school boards, making it suitable for home, office or school use. Applied against glass, it has an opaque, anti-glare effect. This whiteboard film is made by depositing a thin layer of PET on the surface of a PVC backing.

Application: This film is dry-wipeable. The honeycomb glue allows air to escape easily during taping, for easy installation. We recommend the use of erasable markers suitable for whiteboards. For maintenance, clean your board regularly with a cloth or sponge, every week if possible. For stubborn marks, use a magic sponge. This film can erase a trace of erasable ink for up to a month after writing. After that, the felt-tip pen may leave a permanent mark over time.

Référence produit : TB3913

See more details

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Made to order in our workshop in France

Map of France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Preparing an order in the workshop
Preparing an order in the workshop

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

Frequently asked questions

  • How to install adhesive coating yourself?

    All the steps and tips to follow can be found in our article "How to install an adhesive coating?"

  • Can I put adhesive coating on my worktop?

    Yes, it's possible. Our coatings are thick, moisture-resistant and very easy to clean. There are a few precautions to take, such as using trivets. Find out more in our blog post "Can adhesive flooring be installed on a kitchen worktop?"

  • Can the adhesive coating be removed without damaging the furniture underneath?

    You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.

    Our tip for removing adhesive coatings:

    • Start from a corner and pull fairly firmly
    • Use a release solution to cancel out the glue's action
    • Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.
  • Can adhesive coating be applied to a raised surface?

    Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.

    If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.

  • Can adhesive coating be applied to tiles?

    The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.

    For a more aesthetic look, there are two solutions:

    • Smooth the surface with a smoothing compound beforehand
    • Cut tiles to size and reapply a clean grout over them
  • How do I apply adhesive coating in corners?

    For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references
-

No reference selected.
To select new samples, go to the product pages.

See my selection of samples

Samples