Top of the page

Black slate-effect magnetic board film

  • ***** / 5 See reviews
  • Available

  • Product number : TB-3914

Made to order

Add 2.3 ml and benefit from-3%.

39,18 € or € then 2 x €

Highlights

  • Magnetic board effect film
  • Blackboard style
  • Compatible with traditional and liquid chalk
  • Easy to wipe off with a sponge
  • Adds creative space to your home
Read more
Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

Detailed description

Looking for a creative space in your home? Let your imagination run wild with our black slate magnetic board effect adhesive film! Whether in meetings, at school or at home, this erasable chalkboard effect coating will help you express your ideas and get organized. Its black appearance is modern and blends into any interior with sobriety and elegance.

This new composition is composed of a ferrous film, with a total thickness of 500 μm. Its magnetic characteristics have been improved for better element retention.

Ideal for creative spaces, its 120 cm height allows you to install a large rectangle as if it were a school picture. But you're free to cut it to any shape you like - it cuts beautifully! Its "bubble free" system makes it easy to place on any smooth, non-porous surface. This allows air to escape easily during installation, preventing the formation of bubbles.

Important note: This film is to be laid dry. Please note that magnetic films are heavier: we therefore strongly recommend that you lay the film flat 24 hours before application to limit shape memory.

Use: Compatible with traditional and liquid chalk. The ideal way to maintain magnetic blackboard film is to clean it weekly with a sponge and a little soap. To avoid leaving permanent marks, please erase writing up to 1 month after it has been created.

Reference : TB3914

See more details
Installation instructions Technical data

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Made to order in our workshop in France

Map of France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Preparing an order in the workshop
Preparing an order in the workshop

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

You'll also like

8 similar reference(s)

* price per m² for the purchase of a full roll of the largest width.

What our customers say

  • *****

    Il y a 131 jours

    I haven't set it up yet, to be seen later.

  • *****

    Il y a 325 jours

    Thick, rigid film that absorbs minor imperfections in the substrate, but the sticky reverse side isn't sticky enough on a surface like a painted door.
    I had to run to the DIY store to buy a powerful industrial glue. Thanks to this, and after sanding and my door, the film holds perfectly well. Note that not all magnets stick very well.

    Comment Luminis Films - 2024/01/22

    Hello, For this type of film to hold well, the surface must be perfectly smooth and non-porous. As for the magnetic hold, the stronger the magnet, the better it will hold on the film. Sincerely, the Luminis Films Team

  • *****

    Il y a 112 jours

    The picture looks good, it is well magnetized but does not stick to the wall at all, falls off the wall because it comes off quickly, is unusable.

    Commentary Luminis Films - 2024/08/23

    Hello, The strength of the film will depend essentially on the surface on which you install it. For the film to hold well, your surface must be perfectly smooth and non-porous. If this isn't the case, we sell a supergrip film on our website, which you can stick under the picture film to improve its hold. Sincerely, the Luminis Films Team

  • *****

    Il y a 363 jours

    Please note that the magnetic film does not work with the magnets, which are too thin, and nothing is specified on the product data sheet! I asked for a refund, but of course I didn't get it back... in short, I spent 40€ on a magnetic film that may not be useful.

    Comment Luminis Films - 2023/12/14

    Hello, The stronger the magnet, the better it will hold on the film. However, we would like to remind you that you can request free samples directly from our website so that you can carry out a test before placing your order. Sincerely, the Luminis Films Team

  • *****

    Il y a 380 jours

    Hello, as explained to customer service our board has no adhesion despite the pridmander. A commercial gesture has been proposed and we are left with the painting and the pridmader on our hands.

    Commentary Luminis Films - 2023/11/28

    Hello, As you told us by e-mail, you tried to glue the film without Primer at first, so several days elapsed between your 1st installation without Primer and your new attempt with Primer. In the meantime, it's quite possible that the film's glue has dried, which unfortunately renders it totally ineffective. One of our sales representatives did offer you an additional discount on your next order as a gesture of goodwill, but we can't take back a product that's already been used, nor can we send you a new film free of charge, given that you're responsible for the installation error, I'm sorry. Sincerely, the Luminis Films Team

  • *****

    Il y a 380 jours

    I wish I'd known at the time of ordering and for the installation that a hook was needed for the adhesive to hold, but it ended up in the garbage can because it didn't hold.

    Commentary Luminis Films - 2023/11/27

    Hello, We often recommend using a primer for the installation of adhesive coating films. Please do not hesitate to contact us before placing your order to get all the information you need. Best regards, The Luminis Films team

Frequently asked questions

  • How to install adhesive coating yourself?

    All the steps and tips to follow can be found in our article "How to install an adhesive coating?"

  • Can I put adhesive coating on my worktop?

    Yes, it's possible. Our coatings are thick, moisture-resistant and very easy to clean. There are a few precautions to take, such as using trivets. Find out more in our blog post "Can adhesive flooring be installed on a kitchen worktop?"

  • Can the adhesive coating be removed without damaging the furniture underneath?

    You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.

    Our tip for removing adhesive coatings:

    • Start from a corner and pull fairly firmly
    • Use a release solution to cancel out the glue's action
    • Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.

  • Can adhesive coating be applied to a raised surface?

    Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.

    If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.

  • Can adhesive coating be applied to tiles?

    The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.

    For a more aesthetic look, there are two solutions:

    • Smooth the surface with a smoothing compound beforehand
    • Cut tiles to size and reapply a clean grout over them

  • How do I apply adhesive coating in corners?

    For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references -

No reference selected.
To select new samples, go to the product pages.

Envoyer ma demande

See my selection of samples

Samples