Stars Note Trustedshop4.50/5.00 out of 8,883 certified reviews

Install your own glazing films: anti-heat, opacifying, ...

Top of the page

Silver one-way mirror effect film

  • *****

    3.96/5 See reviews
  • Available

  • Product number : MIROIR-200x

Cut to size

12,20 €

The more I buy, the cheaper it gets:

  • 2 ml
    ►
    -3%
  • 6 ml
    ►
    -7%
  • 16 ml
    ►
    -16%
  • 30 ml
    ►
    -24%

Highlights

adhesive

  • Protects from both near and far
  • Modern silver mirror effect colour
  • Suitable for all types of exterior glazing
  • Preserves part of the brightness for light passage: good
  • Durability and durability up to 8 years
Read more

Detailed description

The mirror film for windows provides effective protection against the outside world. In response to increased light, the one-way mirror film turns into a mirror and blocks the view from outside to inside. On the other hand, people inside can still see outside. Even though it protects from view, the one-way mirror film allows a large proportion of the light to pass through. Depending on the exposure of your windows, the light reduction is about 10 to 12%.

Made of precious metal particles, the reflective film has the ability to mirror a stronger light on one side than on the other. Which side should I lay my mirror film on? The side on which the mirror is installed does not affect the functioning of the one-way mirror. If you have a single or double glazed window less than 1.2m², install it indoors. For double glazed windows larger than 1.2 m², you should install it outside.

The one-way mirror film works through a balance of light. It is on the brighter side that the mirror effect of the film appears (regardless of whether the film is installed indoors or outdoors). The one-way glass system works perfectly during the day, but at night, themirror effect is reversed and no longer protects you from outside view. Therefore, you need a solution such as shutters or blinds to counteract this.

Mirror film has the ability to retain the pleasant characteristics of glass such as transparency and clarity while cancelling out less desirable features such as glare. The installation of a one-way mirror film is a real plus and allows you to improve your daily comfort.

This mirror film is to be placed on the outside of your glass to avoid any risk of thermal shock. It can be installed on a single pane as well as on a double pane of more than 1.2m². In case of doubt, do not hesitate to consult the technical data sheet or to contact us directly.

Durability: 5 to 8 years for vertical application in Central Europe.

Référence produit : MIROIR200x

More details

Compare products

  • Type of film
  • Type of installation
  • Type of face-to-face
  • Passage of light
  • Single glazing
  • Double glazing (under 1.2 m²)
  • Double glazing (over 1.2 m²)
  • Skylight and roofing
  • Synthetic glazing (polycarbonate type)
  • Characteristic
  • Reviews

* price per m² for the purchase of a full roll of the largest width.

The Luminis Films Tech brand
Luminis Films Tech

Luminis Films TECH is there for all the little problems of everyday life! Protect yourself from heat, from being overlooked, from prying eyes, from ultraviolet rays, from acts of vandalism, from broken windows... Luminis Films TECH films are ultra-efficient and are available in several categories according to your needs. Resistant, easy to install, some even have an electrostatic finish! They can also be adapted to all your glass walls and even to polycarbonate surfaces thanks to our special selection. Depending on your wishes, you can choose from several dozen references with different characteristics. Among them, security films subject to very strict standards, or anti-heat films that reduce solar energy by up to 90%: with Luminis Films TECH, your daily life becomes more serene!

Read more

Need help with installation?

I do it myself

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

Read more

Customer feedback (112)

*****

3.96/5.00

Overall score on 112 customer reviews

Trusted shop logo

  • *****

    13 mars 2023

    Laying the film is quite complicated

  • *****

    13 février 2023

    The result is very bad, I have already put a lot of stickers on motorhomes for example, I followed their recommendation but the result is awful!
    Traces everywhere, and I think that soapy water is not a good idea, I should have done as with the stickers, use glass cleaner.
    I'm going to take them off and throw them away, a 100ene of euro in the garbage, I won't order here anymore.

    What you can see on the picture is traces, not bubbles, there are also bubbles, from inside it's very ugly, and from outside even more!
    I don't know where the problem comes from, I think the glue used, or the reaction with the soap...
    In short I can only advise against this product.

    Otherwise, as long as the light is stronger outside than inside, it does its job well.

  • *****

    27 avril 2021

    1 positive point: good cut, desired dimensions: perfect

    Products too thin, lack of thickness, I have experience and I am disappointed with the result when installed, I would like to redo everything... I request films for sliding doors and windows, and I receive a product for vehicles.
    Can I have the real product, please?

  • *****

    06 septembre 2020

    The mirror effect works well, but a lot of small bubbles appeared during drying, even though we did exactly the same thing as in the video demonstration.

Frequently asked questions

  • How do I apply window film?

    With a little patience and attention to detail, and by following the installation instructions carefully, you can install your window film yourself. For large surfaces (bay windows, for example), we recommend two people.


    Find out how to apply self-adhesive films in this article.

    Discover the electrostatic film installation tutorial in this article.

    If you don't want to do the installation yourself, don't hesitate to ask for a quote.

  • Should metallized film be applied indoors or outdoors?

    We recommend applying a metallized film to the outside of the glass. The film will be more effective, and your glass will be protected from any thermal shock.

    Don't panic: our films are designed to withstand the vagaries of the weather over time.


    If you cannot apply your metallized film on the outside, you can apply it on the inside in the following cases:

    • Non-laminated single glazing
    • Double-glazed windows less than 1.2m² in area


    Good to know: These precautions must be taken to limit the risk of thermal shock, but there is no such thing as 0 risk. Also, there is no contraindication to installing a transparent film on the inside.

    If in doubt, contact our advisors.

  • What is thermal shock?

    Thermal shock is a reaction that occurs when there is too great a temperature difference between the glass and the surrounding air. This can cause cracks and damage to your glass.


    Thermal shock can occur, for example, if you apply a dark tinted film to a large area of double-glazed glass on the inside. The glass will overheat, and may break.


    To avoid the risk of thermal shock, we recommend outdoor installation.

  • How do I remove my window film?

    Just pull at a gentle angle. If you have electrostatics, it's even easier.

    Here's a tutorial on how to remove adhesive window film.

    You can also find out how to remove and store your electrostatic window film.

  • Does mirror-effect film protect against heat?

    Yes, mirror-effect films automatically protect against heat. Protection varies according to shade. The heat protection properties of mirror effect films are given in the technical data sheet.

  • Does the mirror effect film work at night with the lights on?

    No: the mirror effect always occurs on the brighter side. If it's brighter inside than outside, the mirror effect is reversed.

    To find out more, visit our article "Does the one-way night mirror work?"

  • Is the brightness of a room affected by mirror-effect solar film?

    Yes and no; it's a fairly subjective criterion.

    Technically, the more tinted the film, the greater the impact on room luminosity. A very light film, on the other hand, will have virtually no impact.

    On the other hand, your feeling of "loss of brightness" will depend on :

    • variations in external light
    • your visual acuity
    • your expectations in terms of brightness

    The best way to answer this question is to ask for free samples and test them on your windows! 😉

  • Is mirror-effect film dangerous for birds?

    The reflection caused by the mirror effect can actually confuse birds. For this reason, we offer anti-collision stickers. Their purpose is to warn of an obstacle, and thus change the bird's trajectory.

  • Does the color of the film affect its technical characteristics?

    Yes and no. The color of the film is purely aesthetic. We would like to point out, however, that the "Silver" colors are the most effective in terms of face protection.

    To see the characteristics of a film, we invite you to read its description and technical data sheet.

Your sample list
Free samples are limited to 3 references -

No reference selected.
To select new samples, go to the product pages.

Send my request

See my selection of samples

Samples