Similar references
Anti-vis-à-vis Gold
+ 11 references
Gold reflective one-way mirror film
*****
4.33/5 See the reviews- Available
-
Product number : MIROIR-104i
Cut to size
The more I buy, the cheaper it gets:
-
2 ml►-3%
-
6 ml►-7%
-
16 ml►-16%
-
30 ml►-24%
Highlights
adhesive
- Preserves part of the brightness for light passage: good
- Protects from both near and far
- Elegant gold sheen
- Suitable for single and double glazing below 1.2m².
- Durability up to 15 years
Detailed description
This window film is adhesive and will protect you from the outside world and sun glare, while allowing light to pass through and keeping you visible. This film will also protect your interior with 98% UV rejection. Gold coloured film with mirror effect.
The one-way mirror window film will allow you to change a perfectly mirrored window on one side while keeping the visibility on the other side. It will allow you to protect yourself from prying eyes without losing visibility and brightness. So you can see while being invisible.
The one-way mirror film plays on the phenomenon of light balancing: in reaction to stronger light, the film becomes a reflective screen. It reflects the image on one side like a mirror while maintaining the transparency of the glass on the other side. It therefore allows you to see without being seen.
The solution provided by curtains and blinds is not always suitable for the rooms concerned and results in a significant loss of light. A one-way mirror film offers protection for all glass surfaces where natural light is to be retained without allowing inward visibility.
Highlights:
- From the outside, a perfect mirror
- From the inside, a total transparency
- Allows you to see without being seen
- No maintenance required
Durability: 10 years for vertical application in Central Europe.
Important notes: For a better overview of the films please contact us for a free sample.
It is important to keep in mind that the mirror effect appears on the brighter side. At night, if your interior is lit, it is on the inside that the glass will have the mirror effect and from the outside, the visibility towards the inside will be normal.
The surface to be glued should be free of dust, grease or any other contaminant. Some materials such as polycarbonate can cause bubbling problems. A compatibility test is therefore recommended.
This mirror film is to be applied on the inner side of your glass. If it is safe for a single pane, you can not apply it on a double pane of more than 1.2m ² at the risk of thermal shock. In case of doubt, do not hesitate to consult the technical data sheet or to contact us directly. This type of film has a silver side and a colored side.
Référence produit : MIROIR104i
Compare products
- Type of film
- Type of installation
- Type of face-to-face
- Passage of light
- Single glazing
- Double glazing (under 1.2 m²)
- Double glazing (over 1.2 m²)
- Skylight and roofing
- Synthetic glazing (polycarbonate type)
- Characteristic
- Reviews
-
Gold reflective one-way mirror film
- For near/far
- Light passage: good
- Compatible with small glazings
- Adhesive
- Indoor
- For near/far
- Good
- Yes
- Yes
- No
- No
- No
- Anti-vis-à-vis Gold
*****
MIROIR-104i
-
Bronze reflective one-way mirror film
- For near/far
- Beautiful bronze effect
- Compatible with small glazings
- Adhesive
- Indoor
- For near/far
- Good
- Yes
- Yes
- No
- No
- No
- Anti-screw Bronze
*****
MIROIR-108i
-
Copper reflective one-way mirror film
- For near/far
- beautiful copper mirror effect
- Harmonizes with ochre facades
- Adhesive
- Indoor
- For near/far
- Good
- Yes
- Yes
- No
- No
- No
- Anti vis-à-vis Copper
*****
MIROIR-110i
-
Bronze electrostatic one-way mirror film
- For near/far
- Light passage: good
- All glass compatible
- Electrostatics
- Indoor / Outdoor
- For near/far
- Good
- Yes
- Yes
- Yes
- Yes
- Yes
- Static Bronze
*****
STATMI-208ix
* price per m² for the purchase of a full roll of the largest width.
The Luminis Films Tech brand
Luminis Films TECH is there for all the little problems of everyday life! Protect yourself from heat, from being overlooked, from prying eyes, from ultraviolet rays, from acts of vandalism, from broken windows... Luminis Films TECH films are ultra-efficient and are available in several categories according to your needs. Resistant, easy to install, some even have an electrostatic finish! They can also be adapted to all your glass walls and even to polycarbonate surfaces thanks to our special selection. Depending on your wishes, you can choose from several dozen references with different characteristics. Among them, security films subject to very strict standards, or anti-heat films that reduce solar energy by up to 90%: with Luminis Films TECH, your daily life becomes more serene!
Need help with installation?
I do it myself
Tools for easy installation
Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!
Customer feedback (3)
*****
4.33/5.00
Overall score on 3 customer reviews
-
*****
29 juillet 2021
Very nice product hides the screw and lets the light in very nice gold colour
Not so complicated to install and several tips on how to do it, that's why I bought it... -
*****
19 février 2020
Good product, serious packaging
-
*****
27 janvier 2021
No problem for the setting up and wiping of the film but appearance of bubble after the first day, I wait four weeks to see the finish as expected on the instructions and then I will give my opinion thank you
Your sample list
Free samples are limited to 3 references
-
No reference selected.
To select new samples, go to the product pages.
See my selection of samples
Samples