Top of the page

Decorative adhesive coating in imitation light fir wood

  • Available

  • Product number : BOIS1-2252

Made to order

Or enter your own measurements

Add 1.35 ml and benefit from-3%.

93,19 € or € then 2 x €

Highlights

comfort

  • Adhesive coating in light fir wood color
  • Excellent alternative to paint
  • Structured finish for a realistic look
  • Quick and easy to install
  • Customize your furniture/walls at lower cost
Read more
Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

Detailed description

Give your interior a new lease of life and a touch of greenery with this decorative adhesive coating in light fir imitation wood. This coating adds a realistic touch to your interior.

This adhesive coating in vintage and natural tones is the best alternative to paint. It' s quick and easy to install. Its Airflow glue, also known as "honeycomb glue", prevents the formation of bubbles and/or wrinkles thanks to its micro-channels placed on the adhesive part of the covering. The most important precaution to take is to thoroughly clean the surface where the covering will be applied. This may be a wall or a piece of furniture installed indoors. The surface must be free of dust, residues, grease and other substances. In this way, the adhesive coating will adhere better to the surface. As a result, the durability of the coating will be optimal. This can be as much as 10 years with interior installation.

This adhesive coating is also easy to maintain. Simply use a mild soap ( pH neutral),warm but not boilingwater and a soft cloth. Abrasive solutions, such as ammonia or acetone, should not be used under any circumstances.

To see for yourself the quality and look of this light fir wood adhesive covering in your interior, feel free to order free samples.

Référence produit : BOIS12252.

See more details
Installation instructions Technical data

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Made to order in our workshop in France

Map of France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Preparing an order in the workshop
Preparing an order in the workshop

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

** Unit price for the purchase of the largest quantity.

You'll also like

19 similar reference(s)

* price per m² for the purchase of a full roll of the largest width.

Frequently asked questions

  • How to install adhesive coating yourself?

    All the steps and tips to follow can be found in our article "How to install an adhesive coating?"

  • Can the adhesive coating be removed without damaging the furniture underneath?

    You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.

    Our tip for removing adhesive coatings:

    • Start from a corner and pull fairly firmly
    • Use a release solution to cancel out the glue's action
    • Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.

  • Can adhesive coating be applied to a raised surface?

    Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.

    If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.

  • Can adhesive coating be applied to tiles?

    The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.

    For a more aesthetic look, there are two solutions:

    • Smooth the surface with a smoothing compound beforehand
    • Cut tiles to size and reapply a clean grout over them

  • How do I apply adhesive coating in corners?

    For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references -

No reference selected.
To select new samples, go to the product pages.

Envoyer ma demande

See my selection of samples

Samples