Similar references
Slightly frosted rear projection film
+ 18 references
- Liquid crystal
- White frosted
- Frosted white matt
- Blue frosted
- Bronze frosted
- Grey frosted
- Yellow frosted
- Light frosting
- Metal frosted
- Frosted glitter
- Pink frosted
- Clear static frosting
- Translucent frosted
- Easy-to-install translucent frosting
- Green frosted
- Frosted synthetic glass
- Electrostatic frosted film
- Opaque black static film
Slightly frosted rear projection film
- Available
-
Product number : PROJ-1202i
Cut to size
The more I buy, the cheaper it gets:
-
6 ml►-3%
-
16 ml►-11%
-
30 ml►-15%
Highlights
adhesive
- Very light frosted adhesive that allows you to project on your glass walls
- Ideal for photo/video projections on shop windows
- Frosted finish that ensures image sharpness
- Practical alternative to screens
- 10 year warranty
Detailed description
By choosing this slightly frosted rear projection film, you offer yourself an ultra practical and incomparably sharp diffusion base! The frosted effect, which slightly blurs the glass, will allow a perfect diffusion of your photos or videos while the adhesive side is very practical and an excellent alternative to real projection screens. You will only need a few minutes to stick this rear projection film on your glass and then use it without delay! The removal is also very easy and fast and does not damage the original glass.
We recommend that you point the projector at the back of the frosted rear projection film in order to see the rendering on the other side. Avoid placing the rear projection at eye level and prefer a projection from above or below for a better operation.
This frosted rear projection film can be used with: mobile projectors, fixed projectors, short throw projectors, full HD projectors and interactive projectors.
To achieve the best projection results, we invite you to apply the following points:- The projector must have an image inversion option.
- The result of the projection, as with all rear projections, is related to the lighting. In general, a high brightness projector is recommended (minimum 5,000 ANSI lumens in daylight). Direct sunlight on the projection surface should be avoided.
This 60 micron lightly frosted projection film for glazing offers a 10 year warranty.
Ref product : PROJ1202i
Compare products
- Type of film
- Type of installation
- Characteristic
- Reviews
-
New
Slightly frosted rear projection film
- Very light frosted adhesive.
- Photo/video projection
- Image Sharpness
- Adhesive
- Indoor
- Slightly frosted rear projection film
- -
PROJ-1202i
-
Best sale
Transparent overhead film
- Transparent adhesive
- Photo/video projection
- Alternative to screens
- Adhesive
- Indoor
- Transparent overhead film
*****
PROJ-1201i
-
New
Magnetic erasable board film, Velleda type, white...
- Magnetized Velleda board effect
- Modern matt white finish
- Ideal for overhead projection
- Adhesive
- Indoor
- Magnetic velleda board white matt
- -
TB-3917
* price per m² for the purchase of a full roll of the largest width.
The Luminis Films Innov brand
Luminis Films INNOV, offers you a selection of films with the latest technology, to make your life easier and that of the people around you! In our range you will find anti-microbial films that prevent the spread of viruses, effective anti-visual films that act on your computer screens or even transform into transparent film on demand. All our Luminis Films INNOV products have been tested in real conditions and are the result of several years of research, in order to offer you the best! They are suitable for everyone and can be used in many places, both private and public.
Need help with installation?
I do it myself
Tools for easy installation
Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!
There are no reviews of this product yet.
Frequently asked questions
-
How do I remove my window film?
Just pull at a gentle angle. If you have electrostatics, it's even easier.
Here's a tutorial on how to remove adhesive window film.
You can also find out how to remove and store your electrostatic window film.
Your sample list
Free samples are limited to 3 references
-
No reference selected.
To select new samples, go to the product pages.
See my selection of samples
Samples