Top of the page

Matte black decorative coating with fine glitter

  • Available

  • Product number : SHINE1-2511

Made to order

122 cm

Add 4.5 ml and benefit from-3%.

32,39 € or € then 2 x €

Highlights

comfort

  • Adhesive coating with black fine glitter finish
  • Pleasantly smooth texture
  • Practical for easy customisation of your furniture and walls
  • Ideal for decorating in a vintage style for a touch of pop
  • Excellent alternative to paint
Read more
Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

Detailed description

Have you always dreamed of a wall with fine glitter for a trendy and elegant effect? The black matt adhesive with fine multi-coloured glitter is for you. This high quality coating allows you to cover any type of surface: wall, door, furniture.

Dressing your furniture and walls with this adhesive is easy! Thanks to the honeycomb structure of the adhesive, air bubbles can be removed with a felt fluffer without a hitch. You can therefore count on a very quick and easy application of the decorative coating without any work being required. In addition, this adhesive coating is thermoformable. When heated, the adhesive adapts to the surface on which it is applied, and in particular to all the shapes of the furnishings. With the installation of this decorative adhesive, you save on average 50% compared to a classic renovation.

To give your walls or furniture a new lease of life, count on this high-quality vinyl with excellent resistance to water, dirt, abrasion, UV and wear. Thanks to its thickness, this adhesive also hides small imperfections. Rated A+ in the C.O.V. test and M1 in the fire test, this coating can be installed in an open public area.

Durability: 10 years in interior installation (anti-cracking, flaking, delamination and yellowing)

In order to get an idea of the quality and the real look, we advise you to request a free sample.

See more details
Installation instructions Technical data

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Made to order in our workshop in France

Map of France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Preparing an order in the workshop
Preparing an order in the workshop

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

** Unit price for the purchase of the largest quantity.

You'll also like

14 similar reference(s)

* price per m² for the purchase of a full roll of the largest width.

Frequently asked questions

  • How to install adhesive coating yourself?

    All the steps and tips to follow can be found in our article "How to install an adhesive coating?"

  • Can I put adhesive coating on my worktop?

    Yes, it's possible. Our coatings are thick, moisture-resistant and very easy to clean. There are a few precautions to take, such as using trivets. Find out more in our blog post "Can adhesive flooring be installed on a kitchen worktop?"

  • Can the adhesive coating be removed without damaging the furniture underneath?

    You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.

    Our tip for removing adhesive coatings:

    • Start from a corner and pull fairly firmly
    • Use a release solution to cancel out the glue's action
    • Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.

  • Can adhesive coating be applied to a raised surface?

    Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.

    If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.

  • Can adhesive coating be applied to tiles?

    The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.

    For a more aesthetic look, there are two solutions:

    • Smooth the surface with a smoothing compound beforehand
    • Cut tiles to size and reapply a clean grout over them

  • How do I apply adhesive coating in corners?

    For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references -

No reference selected.
To select new samples, go to the product pages.

Envoyer ma demande

See my selection of samples

Samples