Top of the page

1 frosted viewing strip 5 cm x 5 m

  • Available
  • Product number : VISUEL-1013i

25,91 or € then 2 x

Highlights

adhesive

  • Highlights all your glazing
  • Complies with the safety standards concerning the visibility of glass walls according to the decree of 1 August 2006
  • Finish 1 translucent frosted strip, average thickness: 5cm, length: 5 metres
  • Suitable for all types of interior glazing
  • Easy to install with soapy water
Read more
Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

Detailed description

Opt for a 5 cm by 5 m glass viewing strip with a translucent frosted glass effect. You can then easily cut them into smaller strips to fit the target surface.

The visualization strip allows to highlight glazing partitions and public places. It is particularly useful when there is no need for a complete or almost complete covering of a glazing. It ensures you a not negligible safety.

According to the laws of the sector Voirie et Espaces Publics, their use is made mandatory by the decree of August 1, 2006 supplemented by the circular DGUHC 2007-53 of November 30: "The doors (or partitions) with a significant glass part must be identified with visual elements. It is recommended to arrange the patterns within 2 horizontal bands of width 5 cm, located at 1.10 m and 1.60 m height.

Durability: 10 years for vertical application in Central Europe.

Référence produit : VISUEL1013i

See more details

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Compare products

  • Type of film
  • Type of installation
  • Glass reinforcement
  • Safety standard
  • Single glazing
  • Double-glazed (less than 1.2m²)
  • Reviews

Made to order in our workshop in France

Map of France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Preparing an order in the workshop
Preparing an order in the workshop

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

Frequently asked questions

  • How do I apply window film?

    With a little patience and attention to detail, and by following the installation instructions carefully, you can install your window film yourself. For large surfaces (bay windows, for example), we recommend two people.


    Find out how to apply self-adhesive films in this article.

    Discover the electrostatic film installation tutorial in this article.

    If you don't want to do the installation yourself, don't hesitate to ask for a quote.

  • How do I remove my window film?

    Just pull at a gentle angle. If you have electrostatics, it's even easier.

    Here's a tutorial on how to remove adhesive window film.

    You can also find out how to remove and store your electrostatic window film.

  • What's the difference between opaque and frosted film?

    The frosted film opacifies while allowing light to pass through, for maximum luminosity.

    The opaque film will opacify and stop the passage of light: you'll lose luminosity.

  • Can I order a specific cut (round, half-sphere, etc.)?

    Yes, we can. All you have to do is go to the quotation form, and indicate :

    • The product reference concerned
    • Type of glazing
    • Glazing dimensions
    • Whether or not you need an installation service
  • How can I see without being seen?

    Two-way mirror effect films allow you to see without being seen, when the light is stronger outside than inside.


    It works by balancing the light: the mirror effect is always on the brighter side.

  • Do frosted films affect the brightness of a room?

    No, if you choose a translucent or white frosted film, you won't notice the difference.

    In concrete terms, with a measuring tool there may be a small variation in brightness, but imperceptible to the naked eye. This is one of the advantages of frosted film, unlike mirror-effect film! 😉

    Be careful, if you order a tinted frosted film (gray, black, blue, red, etc.), the passage of light may be affected. In this case, you may lose a little luminosity.

  • What's the difference between white and translucent frosted film?

    White frosted film will be slightly more opaque than translucent frosted film.

    For example: with a translucent film like DEPOLI-301i, you'll be able to see that there's someone behind you, but it'll remain very blurred: you won't be able to tell whether it's a man or a woman.

    With a white frosted film like DEPOLI-300i, you won't notice anyone's there.

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references
-

No reference selected.
To select new samples, go to the product pages.

See my selection of samples

Samples