Top of the page

Repositionable film in dark smoke

  • Available

  • Product number : TOILE-110i

Made to order

152 cm

Add 1 ml and get-3% off

49,81 € or € then 2 x €

Highlights

repositionable

  • Heat Efficiency: Excellent
  • Light transmission: good
  • Smoky silver exterior and black interior
  • Repositionable
  • Interior installation on the frame with 3M scratch pads
Read more
Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

Detailed description

Opt for a repositionable film in a dark smoked colour to protect you from the sun while allowing light to pass through. You can install your film on the joinery of your skylight or windows to reflect the sun's rays. This film rejects 92% solar energy. As a result, it prevents overheating of your rooms exposed to the sun and heat. It is ideal for a room equipped with a skylight for example. In addition to protecting against heat, the repositionable film in dark smoke also protects you from glare and UV rays. Seen from the inside, the film has a "dark smoke" appearance; Seen from the outside, it is "aluminum" to stop the heat and protect it from prying eyes.

This repositionable solar film is applied to the frames of skylights and windows. It should never be placed directly on the windows. Therefore, it is advisable to add at least 3 cm to the dimensions of your glazing to be able to install double-sided scratches on the joinery.

As a reminder, 18 male/female scratches are automatically included in your order. If you want a satisfactory result, we advise you to install 1 scratch every 50 cm on vertical walls and 1 scratch every 30 cm for sloping walls. If in doubt, do not hesitate to contact one of our advisors.

Référence produit : TOILE110i

See more details
Installation instructions Technical data

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Compare products

  • Type of film
  • Type of installation
  • Efficiency against heat
  • Effective against discolouration
  • Effectiveness against glare
  • Passage of light
  • Reviews

* price per m² for the purchase of a full roll of the largest width.

Made to order in our workshop in France

Map of France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Preparing an order in the workshop
Preparing an order in the workshop

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

** Unit price for the purchase of the largest quantity.

You'll also like

3 similar reference(s)

* price per m² for the purchase of a full roll of the largest width.

Frequently asked questions

  • How do I apply window film?

    With a little patience and attention to detail, and by following the installation instructions carefully, you can install your window film yourself. For large surfaces (bay windows, for example), we recommend two people.


    Find out how to apply self-adhesive films in this article.

    Discover the electrostatic film installation tutorial in this article.

    If you don't want to do the installation yourself, don't hesitate to ask for a quote.

  • Should metallized film be applied indoors or outdoors?

    We recommend applying a metallized film to the outside of the glass. The film will be more effective, and your glass will be protected from any thermal shock.

    Don't panic: our films are designed to withstand the vagaries of the weather over time.


    If you cannot apply your metallized film on the outside, you can apply it on the inside in the following cases:

    • Non-laminated single glazing
    • Double-glazed windows less than 1.2m² in area


    Good to know: These precautions must be taken to limit the risk of thermal shock, but there is no such thing as 0 risk. Also, there is no contraindication to installing a transparent film on the inside.

    If in doubt, contact our advisors.

  • How do I remove my window film?

    Just pull at a gentle angle. If you have electrostatics, it's even easier.

    Here's a tutorial on how to remove adhesive window film.

    You can also find out how to remove and store your electrostatic window film.

  • Does mirror-effect film protect against heat?

    Yes, mirror-effect films automatically protect against heat. Protection varies according to shade. The heat protection properties of mirror effect films are given in the technical data sheet.

  • Does the mirror effect film work at night with the lights on?

    No: the mirror effect always occurs on the brighter side. If it's brighter inside than outside, the mirror effect is reversed.

    By the way, there's no such thing as a one-way mirror effect film that works at night with the lights on.

    To find out more, visit our article "Does the one-way night mirror work?"

  • Is the brightness of a room affected by mirror-effect solar film?

    Yes and no; it's a fairly subjective criterion.

    Technically, the more tinted the film, the greater the impact on room luminosity. A very light film, on the other hand, will have virtually no impact.

    On the other hand, your feeling of "loss of brightness" will depend on :

    • variations in external light
    • your visual acuity
    • your expectations in terms of brightness

    The best way to answer this question is to ask for free samples and test them on your windows! 😉

  • Is mirror-effect film dangerous for birds?

    The reflection caused by the mirror effect can actually confuse birds. For this reason, we offer anti-collision stickers. Their purpose is to warn of an obstacle, and thus change the bird's trajectory.

  • Does the color of the film affect its technical characteristics?

    Yes and no. The color of the film is purely aesthetic. We would like to point out, however, that the "Silver" colors are the most effective in terms of face protection.

    To see the characteristics of a film, we invite you to read its description and technical data sheet.

  • What is thermal shock?

    Thermal shock is a reaction that occurs when there is too great a temperature difference between the glass and the surrounding air. This can cause cracks and damage to your glass.


    Thermal shock can occur, for example, if you apply a dark tinted film to a large area of double-glazed glass on the inside. The glass will overheat, and may break.


    To avoid the risk of thermal shock, we recommend outdoor installation.

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references -

No reference selected.
To select new samples, go to the product pages.

Envoyer ma demande

See my selection of samples

Samples