Top of the page

Natural beige wood effect decorative adhesive

  • ***** / 5 See reviews
  • Available
  • Product number : BOIS1-2047

Made to order

Or enter your own measurements

Add 4.96 ml and save 10%.

249,90 -3%

241,53 or € then 2 x

Attention : les films dépassant 122cm de largeur seront en plusieurs parties.

Highlights

comfort

  • Adhesive coating with natural beige imitation wood finish
  • Textured feel for ultra-realistic rendering
  • Ideal for Scandinavian style decoration
  • Excellent alternative to paint
  • Allows you to personalise your furniture and walls at a lower cost
Read more
Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

Detailed description

Let yourself be tempted by this beautiful, realistic and very trendy natural beige imitation wood adhesive!

For all your decorating needs, in a rather Scandinavian and minimalist atmosphere, this authentic beige oak decorative adhesive will find its place on your furniture as well as on your walls.

You'll love its modern natural look and textured finish, which is very pleasant to the touch and creates a real trompe l'oeil!

Please note that the wood grain direction is shown along the length of the cladding (up to 50 metres), while the height/width is no more than 122cm. If you want to fit a whole wall, for example, you will have to make connections.

The application of this decorative adhesive is quick and easy thanks to the "Airflow" technology, otherwise known as "honeycomb glue", which prevents the formation of bubbles and folds thanks to the micro-channels present on the adhesive part, for an exceptional result!

Sustainability : 10 years for interior installation (anti-cracking, flaking, delamination and yellowing)

In order to get a feel for the quality and the real look, we advise you to request a free sample.

See more details

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Made to order in our workshop in France

Map of France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Preparing an order in the workshop
Preparing an order in the workshop

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

** Unit price for the purchase of the largest quantity.

You'll also like

19 similar reference(s)

* price per m² for the purchase of a full roll of the largest width.

What our customers say

  • *****

    Il y a 409 jours

    Easy to install, nice finish, to be seen over time.
    Installation on kitchen facade

  • *****

    Il y a 564 jours

    The product was very easy to order (safe measuring system). The wood look is very realistic to the touch and of excellent quality!
    The delivery was then very fast, so I was able to install it quickly (installation was also very easy, thanks to the thickness of the adhesive).
    However, it does say that the flask is supplied, but plan to have one with you as it wasn't included in my order.

    I recommend +++++

Frequently asked questions

  • Can the adhesive coating be removed without damaging the furniture underneath?

    You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.

    Our tip for removing adhesive coatings:

    • Start from a corner and pull fairly firmly
    • Use a release solution to cancel out the glue's action
    • Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.
  • Can adhesive coating be applied to a raised surface?

    Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.

    If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.

  • Can adhesive coating be applied to tiles?

    The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.

    For a more aesthetic look, there are two solutions:

    • Smooth the surface with a smoothing compound beforehand
    • Cut tiles to size and reapply a clean grout over them
  • How do I apply adhesive coating in corners?

    For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references
-

No reference selected.
To select new samples, go to the product pages.

See my selection of samples

Samples