Top of the page

Vintage green slate effect magnetic board film

  • Ref : TB-3915

indoor installation

The width corresponds to the width of the roll.

For this product, the roll width is: cm.

Need help?

Add 1 extra ml and save 52%.

22,83 € -50%

11,41 € or € then 2 x €

Vos créations ou logos imprimés sur du film !

Imprimer ma création

Nos graphistes adaptent vos créations ✨

Paiement en 3x1ère mensualité aujourd'hui

suivi de 2 mensualités
Soit un total : Dont de frais

Detailed description

Go back to school with this green chalkboard with our adhesive film effect vintage green slate magnet board! It'll stimulate your creativity, inviting you to write, draw, play, make guesses, or simply display your favorite photos!

This film is composed of a ferrous film and a PET film, with a thickness of 500 μm. Its magnetic characteristics have been improved for better element retention.

Ideal for creative spaces, its 120 cm height allows you to install a large rectangle as if it were a school picture. But you're free to cut it to any shape you like - it cuts beautifully! You can easily place it on any smooth, non-porous surface, thanks to its "bubble-free" adhesive system. This allows air to escape easily during installation, preventing the formation of bubbles.

Important note: This film is to be laid dry. Please note that magnetic films are heavier: we therefore strongly recommend that you lay the film flat 24 hours before application to limit shape memory.

Use: Compatible with traditional and liquid chalk. The ideal way to care for magnetic green slate board film is to clean it weekly with a sponge and a little soap. To avoid leaving a permanent mark, please erase writing up to 1 month after creation.

Reference : TB3915

See more details
Technical data Installation instructions

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Tuto: need help with installation?

Tools for easy installation

Quel que soit votre projet, les outils et accessoires de pose proposés par Luminis Films, seront grandement utiles pour la réussite de votre application ! Film adhésifs, électrostatiques, revêtements décoratifs... à chaque produit son matériel de pose associé. Grâce à ces accessoires, offrez-vous la possibilité de poser vous-même votre film ou revêtement Luminis Films et obtenez un résultat net et précis en suivant tous nos tutoriels de pose !

Highlights

  • Magnetic board effect film
  • Vintage green slate chalkboard style
  • Compatible with traditional and liquid chalk
  • Easy to wipe off with a sponge
  • Adds creative space to your home
Preparing an order in the workshop

Made to order in our workshop in France

Nos produits sont imprimés et découpés dans notre atelier, à Villars-les-Dombes. Nous proposons des collections exclusives avec des designs créés et imprimés dans notre studio. Chaque produit commandé sur notre site est réalisé aux mesures du client sans possibilité de rétractation. La couleur perçue peut varier suivant les écrans. Avant de passer commande, testez nos échantillons gratuits ! Et évitez ainsi de ne pas être satisfait, ou de vous tromper 😉
Demandez vos échantillons gratuits !

Customer achievements

Voir plus de contenu

Frequently asked questions

  • How to install adhesive coating yourself?

    All the steps and tips to follow can be found in our article "How to install an adhesive coating?"

  • Can I put adhesive coating on my worktop?

    Yes, it's possible. Our coatings are thick, moisture-resistant and very easy to clean. There are a few precautions to take, such as using trivets. Find out more in our blog post "Can adhesive flooring be installed on a kitchen worktop?"

  • Can the adhesive coating be removed without damaging the furniture underneath?

    You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.

    Our tip for removing adhesive coatings:

    • Start from a corner and pull fairly firmly
    • Use a release solution to cancel out the glue's action
    • Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.

  • Can adhesive coating be applied to a raised surface?

    Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.

    If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.

  • Can adhesive coating be applied to tiles?

    The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.

    For a more aesthetic look, there are two solutions:

    • Smooth the surface with a smoothing compound beforehand
    • Cut tiles to size and reapply a clean grout over them

  • How do I apply adhesive coating in corners?

    For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".

Voir plus de questions

Vous aimerez aussi !

8 similar reference(s)

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references -

No reference selected.
To select new samples, go to the product pages.

Send my request

See my selection of samples

Samples