Top of the page

Dry wipe film, transparent

  • ***** / 5 See reviews
  • Available

  • Product number : TB-3912

Made to order

The width corresponds to the width of the roll.

For this product, the roll width is: cm.

Need help?

Add 1 ml more and benefit from -3%.

19,63 € or € then 2 x €

Highlights

  • Transparent board effect film
  • Use of felt-tip pens, infinitely erasable
  • Customisable: easy-to-cut adhesive
  • Ideal in an office or meeting room to share ideas
  • Practical and decorative function for easy installation
Read more
3x payment1st monthly payment today

followed by 2 monthly instalments
Or total : Of which expenses

Detailed description

Discover this transparent dry-erase film that transforms a decoration or a print into a real writing board. It can be used with standard or Velleda markers and is usually applied to glass surfaces. If nothing is written on the film then it is discreet, but please note that this transparent board is slightly cloudy.

It is very popular in common areas such as open spaces or offices, but it can also be used in shops or even at home to give free rein to everyone's creativity!

We advise you to clean the board every week if possible with a sponge or a damp cloth to avoid stubborn marks.

Reference : TB3912

See more details
Installation instructions Technical data

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Made to order in our workshop in France

Map of France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Preparing an order in the workshop
Preparing an order in the workshop

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

You'll also like

8 similar reference(s)

What our customers say

  • *****

    Il y a 514 jours

    The film is not adhesive. It's supposed to be adhesive, but it's not, it's just thermostatic. I've tried and tested it, and there's no protective film to remove (as described in the document). So it will hold on glass, but I don't know how long it will work without adhesive.

    Commentary Luminis Films - 2024/02/05

    Hello, You've chosen an adhesive board film. I can assure you that it does have a protective film. When you remove this film, it will stick to your fingers. If you need any further advice, please don't hesitate to contact us. We look forward to hearing from you, The Luminis Films team Yours sincerely The Luminis Films team

Frequently asked questions

  • How to install adhesive coating yourself?

    All the steps and tips to follow can be found in our article "How to install an adhesive coating?"

  • Can I put adhesive coating on my worktop?

    Yes, it's possible. Our coatings are thick, moisture-resistant and very easy to clean. There are a few precautions to take, such as using trivets. Find out more in our blog post "Can adhesive flooring be installed on a kitchen worktop?"

  • Can the adhesive coating be removed without damaging the furniture underneath?

    You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.

    Our tip for removing adhesive coatings:

    • Start from a corner and pull fairly firmly
    • Use a release solution to cancel out the glue's action
    • Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.

  • Can adhesive coating be applied to a raised surface?

    Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.

    If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.

  • Can adhesive coating be applied to tiles?

    The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.

    For a more aesthetic look, there are two solutions:

    • Smooth the surface with a smoothing compound beforehand
    • Cut tiles to size and reapply a clean grout over them

  • How do I apply adhesive coating in corners?

    For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references -

No reference selected.
To select new samples, go to the product pages.

Send my request

See my selection of samples

Samples