



100%
Glossy whiteboard film for Velleda erasable markers
-
Ref : TB-3913
indoor installation
Vos créations ou logos imprimés sur du film !
Imprimer ma créationNos graphistes adaptent vos créations ✨
suivi de 2 mensualités
Soit un total : Dont de frais
Detailed description
Write your ideas down with our glossy white erasable board effect film! A creativity booster, it will accessorize your kitchen, office or any other room to add effective, useful decoration.
This ultra-versatile film gives you thousands of ideas for using it: writing a shopping list, magnetizing drawings, making a reminder, helping children with lessons, drawing, playing, etc. The only limit is your imagination :) Simply apply to a smooth, clean, non-porous surface. Just like conventional adhesive coatings.
Its new composition makes it more resistant (100µm). Its height of 1.52 m is virtually identical to that of school boards, making it suitable for home, office or school use. Applied against glass, it has an opaque, anti-glare effect. This whiteboard film is made by depositing a thin layer of PET on the surface of a PVC backing.
Application: This film is dry-wipeable. The honeycomb glue allows air to escape easily during taping, for easy installation. We recommend the use of erasable markers suitable for whiteboards. For maintenance, clean your board regularly with a cloth or sponge, every week if possible. For stubborn marks, use a magic sponge. This film can erase a trace of erasable ink for up to a month after writing. After that, the felt-tip pen may leave a permanent mark over time.
Référence produit : TB3913
Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.
Tuto: need help with installation?
DOWNLOAD
Installation instructionsTools for easy installation
Quel que soit votre projet, les outils et accessoires de pose proposés par Luminis Films, seront grandement utiles pour la réussite de votre application ! Film adhésifs, électrostatiques, revêtements décoratifs... à chaque produit son matériel de pose associé. Grâce à ces accessoires, offrez-vous la possibilité de poser vous-même votre film ou revêtement Luminis Films et obtenez un résultat net et précis en suivant tous nos tutoriels de pose !
-
None of our products match your filter selection.
Please try another filter combination, or contact us with your specific requirements.
Highlights
- Glossy whiteboard effect film velleda
- Compatible with erasable markers
- For use on all smooth, non-porous surfaces (walls, desks, furniture...)
- Easy to wipe off with a sponge
- Easy to cut: Customize your film

Made to order in our workshop in France
Nos produits sont imprimés et découpés dans notre atelier, à Villars-les-Dombes.
Nous proposons des collections exclusives avec des designs créés et imprimés dans notre studio. Chaque produit commandé sur notre site est
réalisé aux mesures du client sans possibilité de rétractation. La couleur perçue peut varier suivant les écrans. Avant de passer commande, testez nos
échantillons gratuits ! Et évitez ainsi de ne pas être satisfait, ou de vous tromper 😉
Demandez vos échantillons gratuits !
Frequently asked questions
-
How to install adhesive coating yourself?
All the steps and tips to follow can be found in our article "How to install an adhesive coating?"
-
Can I put adhesive coating on my worktop?
Yes, it's possible. Our coatings are thick, moisture-resistant and very easy to clean. There are a few precautions to take, such as using trivets. Find out more in our blog post "Can adhesive flooring be installed on a kitchen worktop?"
-
Can the adhesive coating be removed without damaging the furniture underneath?
You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.
Our tip for removing adhesive coatings:
- Start from a corner and pull fairly firmly
- Use a release solution to cancel out the glue's action
- Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.
-
Can adhesive coating be applied to a raised surface?
Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.
If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.
-
Can adhesive coating be applied to tiles?
The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.
For a more aesthetic look, there are two solutions:
- Smooth the surface with a smoothing compound beforehand
- Cut tiles to size and reapply a clean grout over them
-
How do I apply adhesive coating in corners?
For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".
Compare products
- Type of installation
- Relief
- Trend
- Thermoformable
- Air Flow Technology
- Reviews
Vous aimerez aussi !
8 similar reference(s)
Entrust installation to our professionals

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.
Your sample list
Free samples are limited to 3 references
-
No reference selected.
To select new samples, go to the product pages.
See my selection of samples
Samples