Top of the page

Colourless anti-graffiti film

  • ***** / 5 See reviews
  • Available

  • Product number : GRAF-700i

Made to order

Add 1 ml and get-3% off

14,42 € or € then 2 x €

Highlights

  • Protects your exposed glass from graffiti, tags and scratches
  • Ideal for prevention: easy-to-remove semi-permanent glue
  • Meets EN 45545-1 class HL3
  • Easy to clean and solvent resistant
  • Optimal transparency, suitable for all types of glazing
Read more
Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

Detailed description

This security window film is specially designed for easier cleaning of graffiti. The film can be easily changed, restoring the window to its original appearance. The adhesive film is resistant to most solvents and can be cleaned. In case of really persistent traces, the film can be easily peeled off and replaced in a few minutes.
The film is also designed to protect the glass against deliberate attacks and scratches. The thickness of the film acts as a barrier between the glass and the vandal. The glass remains intact.


Increase the strength of glass with safety glazing film. Thanks to a specially developed adhesive, safety glazing films absorb the energy created by the impact of an object or the shock wave from an explosion.


The risk of glass breakage is greatly reduced. Should the pane break, an invisible, resistant membrane holds the broken glass in place. The glazing will star but remain in place, preserving the safety of people and equipment. This glazing film meets the most stringent safety standards. Its fire rating means that the film burns without creating or spreading flames. It will also prevent the film from shattering under high temperatures.


The security film also has the particularity of not losing its transparency and visibility even after years of exposure to the sun's rays.


Durability: 5 to 8 years for vertical application in Central Europe.


Important notes: For a better overview of the films please contact us for a free sample.
The surface to be bonded must be free of dust, grease or any other contaminant. Some materials such as polycarbonate can cause bubbling problems. A compatibility test is therefore recommended.


Référence produit : GRAF700i

See more details
Installation instructions Technical data

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Compare products

  • Type of film
  • Type of installation
  • Glass reinforcement
  • Safety standard
  • Single glazing
  • Double-glazed (less than 1.2m²)
  • Reviews

Made to order in our workshop in France

Map of France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Preparing an order in the workshop
Preparing an order in the workshop

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

You'll also like

11 similar reference(s)

* price per m² for the purchase of a full roll of the largest width.

What our customers say

  • *****

    Il y a 1762 jours

    The old one lasted 5 years and could still do a bit but the dog's claws were very visible so change.

  • *****

    Il y a 1769 jours

    No comments, already used items

  • *****

    Il y a 1769 jours

    The installation instructions are very clear.

  • *****

    Il y a 1826 jours

    I chose this product to protect my glass furniture. The width of the film is great for covering large furniture and the length is up to you. I highly recommend it.

  • *****

    Il y a 1949 jours

    Installed on an outdoor table, to be seen in use.

  • *****

    Il y a 2032 jours

    Protecting a glass table very well

  • *****

    Il y a 2183 jours

    Evaluation received before delivery, so it's a bit early to evaluate the product. But if it's as good as my last order, I'll give it a 10/10.

  • *****

    Il y a 2270 jours

    Excellent quality product.
    I personally bought this product to protect the glass of my sandblasting machine.
    and I'm very happy with it (good resistance to sandblasting at 6 bars).

  • *****

    Il y a 1710 jours

    Very good product,
    And well explained on the instructions.
    Perfectly meets your expectations.

  • *****

    Il y a 1797 jours

    Top delivery
    Top product
    But a pain to install ( well I admit it was on a black glass table )
    Luckily I had taken two pieces

  • *****

    Il y a 1625 jours

    I was looking for an anti-scratch wire but the GRAF-700i is the only one on offer. A bit expensive for what it is. The installation went well according to instructions but I had some microbubbles with stuck debris. Maybe I needed to clean the surface even more, but it's not easy. Aging remains to be seen

  • *****

    Il y a 1241 jours

    I have not received my order

Frequently asked questions

  • Can the adhesive coating be removed without damaging the furniture underneath?

    You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.

    Our tip for removing adhesive coatings:

    • Start from a corner and pull fairly firmly
    • Use a release solution to cancel out the glue's action
    • Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.

  • Can adhesive coating be applied to a raised surface?

    Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.

    If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.

  • Can adhesive coating be applied to tiles?

    The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.

    For a more aesthetic look, there are two solutions:

    • Smooth the surface with a smoothing compound beforehand
    • Cut tiles to size and reapply a clean grout over them

  • How do I apply adhesive coating in corners?

    For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references -

No reference selected.
To select new samples, go to the product pages.

Envoyer ma demande

See my selection of samples

Samples