





100%
Double-sided mirror-effect wall adhesive
- ***** 1.00 / 5 See reviews
-
Ref : INDUS-2737
comfort
indoor installation
Your designs or logos printed on film!
Print my designOur graphic designers adapt your creations ✨
followed by 2 monthly payments
for a total of : Of which expenses
Detailed description
Avec cet adhésif mural effet miroir recto-verso, pas de soucis pour voir votre reflet ! Cet adhésif mural effet miroir recto-verso transforme n'importe quelle surface lisse et non-poreuse en un miroir légèrement déformant. Cet adhésif s'applique sur de nombreuses surfaces comme des portes, des murs, ou même des vitrages (en pose intérieure !).
Caractéristiques techniques :
• Largeur : 122 cm
• Longueur : 150 cm max
• Traitement anti-rayures
• Adhésif de qualité avec une tenue ultra-forte
• Double-liner de protection : à l'avant et à l'arrière
• Effet miroir déformant
• Durabilité en intérieur : 10 à 12 ans
Il est important de comprendre que le moindre défaut ou irrégularité du support sera visible en surface et rendra l'effet miroir moins net. Il est donc conseillé de le poser sur une surface ultra lisse ou un vitrage.
Decorating tip: Cut this adhesive coating into an oval shape, and hang a few metres of rope around it to create a frame. Now you've got a beautiful, new mirror for less!
This mirror-effect film has a real advantage if you have interior glazing to equip: the mirror effect is produced on both sides. Whether on the front or back of the glass, with this film, you'll see your reflection! That's why it comes with two protective liners. Remember to remove both the front and rear liners during installation.
Pose et entretien : Cet adhésif se pose en intérieur. Pour le nettoyer, munissez-vous d'un chiffon doux en micro-fibre ainsi que d'eau savonneuse.
Référence produit : INDUS2737.
Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.
Tuto: need help with installation?
DOWNLOAD
Installation instructionsTools for easy installation
Whatever your project, the application tools and accessories offered by Luminis Films will be invaluable to the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application equipment. Thanks to these accessories, you can install your Luminis Films film or coating yourself, and get a clean, precise result by following our installation tutorials!
** Unit price for the purchase of the largest quantity.
Highlights
- Mirror effect adhesive coating
- Miroitant des deux côtés
- Anti-scratch protective treatment
- Ultra-strong adhesive hold
- Contemporary and industrial trends

Made to order in our workshop in France
Our products are printed and cut in our workshop in Villars-les-Dombes.
We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is
made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our
free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!
Frequently asked questions
-
How to install adhesive coating yourself?
All the steps and tips to follow can be found in our article "How to install an adhesive coating?"
-
Can I put adhesive coating on my worktop?
Yes, it's possible. Our coatings are thick, moisture-resistant and very easy to clean. There are a few precautions to take, such as using trivets. Find out more in our blog post "Can adhesive flooring be installed on a kitchen worktop?"
-
Can the adhesive coating be removed without damaging the furniture underneath?
You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.
Our tip for removing adhesive coatings:
- Start from a corner and pull fairly firmly
- Use a release solution to cancel out the glue's action
- Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.
-
Can adhesive coating be applied to a raised surface?
Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.
If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.
-
Can adhesive coating be applied to tiles?
The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.
For a more aesthetic look, there are two solutions:
- Smooth the surface with a smoothing compound beforehand
- Cut tiles to size and reapply a clean grout over them
-
How do I apply adhesive coating in corners?
For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".
Compare products
- Type of installation
- Relief
- Trend
- Thermoformable
- Air Flow Technology
- Reviews
-
New
-
Best sale
Reflective total mirror film silver
- For near/far
- Light passage: light
- Privacy: maximum
- Indoor
- No
- Contemporary
- No
- No
*****
MIROIR-111i
-
Best sale
Brushed aluminium effect adhesive film
- Brushed aluminium finish
- Textured touch
- Industrial trend
- Indoor
- Yes
- Industrial
- Yes
- Yes
*****
INDUS-2700
You'll love it too!
12 similar reference(s)
Entrust installation to our professionals

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.
Your sample list
Free samples are limited to 3 references
-
No reference selected.
To select new samples, go to the product pages.
See my selection of samples
Samples