Colourless protective adhesive
- ***** / 5 See reviews
- Available
-
Product number : PROTEC-6008
followed by 2 monthly payments
for a total of : Of which expenses
Detailed description
This protective adhesive is a 150 micron thick colorless coating, making it a very durable protective solution.
When applied directly, this type of coating acts as a real protective film for all your smooth surfaces subject to regular wear and tear such as your desks, computer or smartphone shells, chair backs, etc. This adhesive film also protects your smooth veneered tables or lacquered furniture against scratches and chipping.
Its transparency does not change the appearance of the substrate, but you may experience a slight haze if you apply it to a glass surface. Be aware that you can remove a well-spent protective adhesive and apply a new one without any adhesive residue.
Outdoor durability: 7 years
In order to get an idea of the quality and the real look, we advise you to request a free sample.
Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.
Compare products
- Type of installation
- Relief
- Trend
- Thermoformable
- Air Flow Technology
- Reviews
-
New -
Adhesive film for reinforced furniture protection
- Ultra-resistant gloss finish
- 160 microns
- Protects all surfaces
- Indoor / Outdoor
- No
- -
- Yes
- No
*****
PROTEC-6004
-
-
* price per m² for the purchase of a full roll of the largest width.
Made to order in our workshop in France
Our products are printed and cut in our workshop in Villars-les-Dombes.
We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is
made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our
free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!
Tuto: need help with installation?
DOWNLOAD
Installation instructionsTools for easy installation
Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!
You'll also like
3 similar reference(s)
* price per m² for the purchase of a full roll of the largest width.
What our customers say
Frequently asked questions
-
How to install adhesive coating yourself?
All the steps and tips to follow can be found in our article "How to install an adhesive coating?"
-
Can I put adhesive coating on my worktop?
Yes, it's possible. Our coatings are thick, moisture-resistant and very easy to clean. There are a few precautions to take, such as using trivets. Find out more in our blog post "Can adhesive flooring be installed on a kitchen worktop?"
-
Can the adhesive coating be removed without damaging the furniture underneath?
You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.
Our tip for removing adhesive coatings:
- Start from a corner and pull fairly firmly
- Use a release solution to cancel out the glue's action
- Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.
-
Can adhesive coating be applied to a raised surface?
Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.
If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.
-
Can adhesive coating be applied to tiles?
The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.
For a more aesthetic look, there are two solutions:
- Smooth the surface with a smoothing compound beforehand
- Cut tiles to size and reapply a clean grout over them
-
How do I apply adhesive coating in corners?
For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".
Entrust installation to our professionals
Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.
Your sample list
Free samples are limited to 3 references
-
No reference selected.
To select new samples, go to the product pages.
See my selection of samples
Samples