Top of the page

Concrete grey slate effect magnetic board film

  • ***** / 5 See reviews
  • Available

  • Product number : TB-3916

Made to order

Enter your dimensions in centimetres (cm). To specify in millimetres, add a comma. (example: 15.4 cm)

cm
cm

Minimum billing of 0.4 m² per cut

Freeshipping

Highlights

  • Magnetic board effect film
  • Concrete grey slate chalkboard style
  • Compatible with traditional and liquid chalk
  • Easy to wipe off with a sponge
  • Adds creative space to your home
Read more
Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

Also available in

Detailed description

Combine the utility of a slate board with the modernity of gray with our concrete gray slate magnetic board effect adhesive film ! This modern shade is perfect for industrial and modern-style interiors.

Its composition in PET and ferrous film makes it compatible with magnets and offers good magnetic holding of elements on a vertical surface. Its thickness is 500 μm.

This adhesive is flexible and easy to cut. It can be shaped to fit any smooth, non-porous surface. Use traditional chalk or liquid chalk to write ideas, reminders and anything else you think might be useful and creative!

Important note: This film is to be laid dry. Please note that magnetic films are heavier: we therefore strongly recommend that you lay the film flat 24 hours before application to limit shape memory.

How to use: The ideal way to care for grey magnetic slate board film is to clean it weekly with a sponge and a little soap. To avoid leaving permanent marks, please erase writing up to 1 month after it has been created.

Reference : TB3916

See more details
Installation instructions Technical data

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Made to order in our workshop in France

Map of France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Preparing an order in the workshop
Preparing an order in the workshop

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

** Unit price for the purchase of the largest quantity.

You'll also like

8 similar reference(s)

* price per m² for the purchase of a full roll of the largest width.

What our customers say

  • *****

    Il y a 130 jours

    Null

    Commentary Luminis Films - 2024/08/06

    Hello, Could you please tell us how your order did not meet your expectations? You can use the contact form to get in touch with our online customer service department, and we'll try to find a solution that's right for you. Best regards The Luminis Films team

Frequently asked questions

  • How to install adhesive coating yourself?

    All the steps and tips to follow can be found in our article "How to install an adhesive coating?"

  • Can I put adhesive coating on my worktop?

    Yes, it's possible. Our coatings are thick, moisture-resistant and very easy to clean. There are a few precautions to take, such as using trivets. Find out more in our blog post "Can adhesive flooring be installed on a kitchen worktop?"

  • Can the adhesive coating be removed without damaging the furniture underneath?

    You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.

    Our tip for removing adhesive coatings:

    • Start from a corner and pull fairly firmly
    • Use a release solution to cancel out the glue's action
    • Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.

  • Can adhesive coating be applied to a raised surface?

    Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.

    If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.

  • Can adhesive coating be applied to tiles?

    The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.

    For a more aesthetic look, there are two solutions:

    • Smooth the surface with a smoothing compound beforehand
    • Cut tiles to size and reapply a clean grout over them

  • How do I apply adhesive coating in corners?

    For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references -

No reference selected.
To select new samples, go to the product pages.

Envoyer ma demande

See my selection of samples

Samples