Top of the page

DI-NOC 3M brown fabric effect decorative coating

  • Available

  • Product number : 3M-NU-2010

Made to order

122 cm

Add 4 ml and get-3% off

66,41 € or € then 2 x €

Highlights

exclusive

  • Adhesive coating with brown fabric effect and raw look
  • Suitable for indoor and outdoor installation
  • Pattern developed by 3M expertise: ideal for decorative use in a Vintage style
  • Ideal alternative to paint to give walls/furniture a new look
  • Range: 2D recommended for flat surfaces
Read more
Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

Detailed description

Bring a cocooning touch to your Vintage decoration! Opt for this 3M fabric effect decorative adhesive. Available in brown with a woollen look with light grey/beige threads, this adhesive has a textured touch for a realistic effect!

With its 2D finish, we recommend the application of this adhesive on flat or slightly curved surfaces, as it is not sensitive to thermoforming.

Thanks to the presence of the "3M Comply" adhesive technology, you will benefit from a DI-NOC that is repositionable and fights any risk of bubbles.

Applicable to most surfaces: wood, metal, plastic... this adhesive promises long-lasting durability with interior and exterior application for up to 15 years, making it an ideal alternative to paint!

See more details
Installation instructions Technical data

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Made to order in our workshop in France

Map of France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Preparing an order in the workshop
Preparing an order in the workshop

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

** Unit price for the purchase of the largest quantity.

You'll also like

17 similar reference(s)

* price per m² for the purchase of a full roll of the largest width.

Frequently asked questions

  • How to install adhesive coating yourself?

    All the steps and tips to follow can be found in our article "How to install an adhesive coating?"

  • Can I put adhesive coating on my worktop?

    Yes, it's possible. Our coatings are thick, moisture-resistant and very easy to clean. There are a few precautions to take, such as using trivets. Find out more in our blog post "Can adhesive flooring be installed on a kitchen worktop?"

  • How do you know which way the pattern will go?

    If your film includes a motif, we invite you to view the last image in the photo carousel.

    The image explains the direction of the pattern in relation to the roll. You'll be able to enter your dimensions to have the pattern in the direction you want.

  • Can the adhesive coating be removed without damaging the furniture underneath?

    You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.

    Our tip for removing adhesive coatings:

    • Start from a corner and pull fairly firmly
    • Use a release solution to cancel out the glue's action
    • Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.

  • Can adhesive coating be applied to a raised surface?

    Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.

    If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.

  • Can adhesive coating be applied to tiles?

    The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.

    For a more aesthetic look, there are two solutions:

    • Smooth the surface with a smoothing compound beforehand
    • Cut tiles to size and reapply a clean grout over them

  • How do I apply adhesive coating in corners?

    For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references -

No reference selected.
To select new samples, go to the product pages.

Envoyer ma demande

See my selection of samples

Samples