Repositionable frosted film with fine criss-cross lines

Made to order in our workshop in France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Frequently asked questions

• How do I apply window film?

  With a little patience and attention to detail, and by following the installation instructions carefully, you can install your window film yourself. For large surfaces (bay windows, for example), we recommend two people.

  
  

  Find out how to apply self-adhesive films in this article.

  Discover the electrostatic film installation tutorial in this article.

  If you don't want to do the installation yourself, don't hesitate to ask for a quote.

• How do I remove my window film?

  Just pull at a gentle angle. If you have electrostatics, it's even easier.

  Here's a tutorial on how to remove adhesive window film.

  You can also find out how to remove and store your electrostatic window film.

• What's the difference between opaque and frosted film?

  The frosted film opacifies while allowing light to pass through, for maximum luminosity.

  The opaque film will opacify and stop the passage of light: you'll lose luminosity.

• Can I order a specific cut (round, half-sphere, etc.)?

  Yes, we can. All you have to do is go to the quotation form, and indicate :

  • The product reference concerned
  • Type of glazing
  • Glazing dimensions
  • Whether or not you need an installation service

• How can I see without being seen?

  Two-way mirror effect films allow you to see without being seen, when the light is stronger outside than inside.

  
  

  It works by balancing the light: the mirror effect is always on the brighter side.

• Do frosted films affect the brightness of a room?

  No, if you choose a translucent or white frosted film, you won't notice the difference.

  In concrete terms, with a measuring tool there may be a small variation in brightness, but imperceptible to the naked eye. This is one of the advantages of frosted film, unlike mirror-effect film! 😉

  Be careful, if you order a tinted frosted film (gray, black, blue, red, etc.), the passage of light may be affected. In this case, you may lose a little luminosity.

• What's the difference between white and translucent frosted film?

  White frosted film will be slightly more opaque than translucent frosted film.

  For example: with a translucent film like DEPOLI-301i, you'll be able to see that there's someone behind you, but it'll remain very blurred: you won't be able to tell whether it's a man or a woman.

  With a white frosted film like DEPOLI-300i, you won't notice anyone's there.