









100%
Textured electrostatic anti-vis film
- ***** 4.69 / 5 Voir les avis
-
Ref : STAT-602i
electrostatics
indoor installation
Your designs or logos printed on film!
Print my designOur graphic designers adapt your creations ✨
followed by 2 monthly payments
for a total of : Of which expenses
What our customers say
-
***** Il y a 1022 jours
Ravie ! Film electrostatique commandé pour poser sur châssis vitré de la porte d’entrée, afin d’estomper la vue sur les poubelles et voiture des voisins .Très bel effet ,je trouve la porte encore plus belle , toujours une bonne luminosité, et la vue bien estompée , beaucoup plus agréable ! Je recommande
-
***** Il y a 1553 jours
pas encore posé, mais je suis sûre que ça sera très bien, comme tous les produits Luminis Films
-
***** Il y a 1672 jours
Very good good good good good good good
-
***** Il y a 1936 jours
Good quality, easy to install, thick enough to hide the opposite side.
-
***** Il y a 1953 jours
Easy, no-fuss installation
-
***** Il y a 1962 jours
Produit conforme à l'échantillon. Pose facile mais il faut gérer le mm lors de la coupe car le produit se dilate très légèrement lors de la pose. Très bon rendu. Cela nous a permis d'éviter de changer les vitre de nos portes à moindre frais.
-
***** Il y a 1974 jours
Chosen because it's easier to install than bonded film, and lets light through while providing privacy.
-
***** Il y a 1988 jours
Your comment must be at least 25 characters long
-
***** Il y a 1990 jours
Good product; easy to install
-
***** Il y a 2069 jours
Product meets expectations
-
***** Il y a 2250 jours
Corresponds to the product described on the website
-
***** Il y a 2279 jours
installation simple et résultat super Très satisfait
-
***** Il y a 2280 jours
TB and easy installation as per instructions
-
***** Il y a 2333 jours
A product that meets my expectations and filters out unwanted glances.
-
***** Il y a 2440 jours
produit parfait l faut voir avec le temps
-
***** Il y a 2518 jours
stars
-
***** Il y a 2553 jours
A little surprised by the product, which doesn't give the same effect as the photo. But the blackout effect is very effective, for what's not right in front of the glass.
-
***** Il y a 2948 jours
parfait à la pose. mais je ne pourrais vraiment juger le produit qu' après quelques années.
-
***** Il y a 897 jours
N'ayant pas suffisamment d'antériorité pour juger de la qualité de vie du produit dans le temps, puisque je l'ai posé depuis deux semaines environ, je ne vais partager mon expérience que sur les points suivants : - Site Internet intuitif et bien conçu avec une large gamme de produits, des tutos vidéos de pose précis, la possibilité de commander ses films sur mesure. - Livraison rapide, emballage soigné, suivi de la commande OK avec information de la disponibilité en point relais. - Produit reçu (film électrostatique pour fenêtres anti vis à vis) conforme au descriptif et à la photo du site, un tuto avec des conseils est joint pour aider la pose du produit. - La pose en elle-même est relativement facile (le plus difficile étant de décoller le film de sa pellicule protectrice) et les petites bulles d'eau qui restaient après la pose ont disparu après quelques jours. Donc jusqu'ici tout va bien, le rendu sur la vitre de la fenêtre est bon, reste juste l'incertitude sur la longévité du produit au fil du temps et la crainte qu'il se décolle de la vitre avec la chaleur. Seul bémol à ce stade : Le prix un peu élevé des articles... J'espère donc que leur qualité sera toujours au rendez-vous dans quelques années.
-
***** Il y a 907 jours
Insufficiently opaque and delivery error on top...
Detailed description
This repositionable film protects you from distant onlookers thanks to its beautiful embossed effect. Totally transparent, it enhances privacy without darkening the room. Thanks to its elaborate texture, this electrostatic film lets in a maximum amount of light while protecting you from outside glances. It only allows you to discern outside silhouettes to a greater or lesser extent. Its simple, unobtrusive design will blend in easily with your decor.
It's a simple, fast and effective way to completely change the appearance of your windows, while preserving the brightness of your interior. As the film is repositionable, it can be applied permanently or temporarily, depending on the application.
Storage: Between 2 uses, it's important to store your glass-static film in good conditions: wrap it around a tube and store it in a dust-free place. Before reuse, wash with plenty of water and a little liquid soap (to remove any dust that may have adhered to the film).
Important note: To be able to use the film several times, remember to store it clean, wrapped and in a dust-free place.
Product life: 2 years.
Ref product : STAT602i - Enigma
Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.
Tuto: need help with installation?
Tools for easy installation
Whatever your project, the application tools and accessories offered by Luminis Films will be invaluable to the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application equipment. Thanks to these accessories, you can install your Luminis Films film or coating yourself, and get a clean, precise result by following our installation tutorials!
-
None of our products match your filter selection.
Please try another filter combination, or contact us with your specific requirements.
Highlights
- Translucent hammered glass effect finish
- Beautiful vintage effect
- Infinitely repositionable thanks to electrostatics
- Slightly opacifies your glass walls for a level of privacy that's :Very good
- Preserves the brightness and visibility of your interior for an excellent light passage

Made to order in our workshop in France
Our products are printed and cut in our workshop in Villars-les-Dombes.
We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is
made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our
free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!
Frequently asked questions
-
How do I apply window film?
With a little patience and attention to detail, and by following the installation instructions carefully, you can install your window film yourself. For large surfaces (bay windows, for example), we recommend two people.
Find out how to apply self-adhesive films in this article.
Discover the electrostatic film installation tutorial in this article.
If you don't want to do the installation yourself, don't hesitate to ask for a quote.
-
How do I remove my window film?
Just pull at a gentle angle. If you have electrostatics, it's even easier.
Here's a tutorial on how to remove adhesive window film.
You can also find out how to remove and store your electrostatic window film.
-
How do you know which way the pattern will go?
If your film includes a motif, we invite you to view the last image in the photo carousel.
The image explains the direction of the pattern in relation to the roll. You'll be able to enter your dimensions to have the pattern in the direction you want.
-
Can I have my own design or logo printed?
Yes, it's possible! All you have to do is go to the films you want to personalize.
Order the desired finish with the dimensions you need, and our graphic designer will contact you to work on your customized project together.
-
I'd like an electrostatic version of this adhesive film (or vice versa); is this possible?
Yes, it's possible. I invite you to request a quote, specifying your requirements and the dimensions you need. An advisor will make you a proposal for the window film you want with the desired backing.
-
I have small glazing: is it possible to change the size of the pattern to fit?
You can do it withpersonalized printing. All you have to do is order a film to be personalized with the size you need, and ask for the motif you're interested in to be reduced. Our graphic designer will send you a proof to validate your order.
Compare products
- Type of film
- Type of installation
- Type of pattern
- Level of privacy
- Passage of light
- Characteristic
- Reviews
-


Textured electrostatic anti-vis film
- Translucent hammered glass effect
- Beautiful vintage effect
- Infinitely repositionable
- electrostatic
- indoor installation
- Design
- Very good
- Excellent
- Textured effect
*****
STAT-602i
-

NewDecorative film with striated glass effect
- Light transmission: excellent
- Level of privacy: excellent
- Perfectly imitates flute glass
- adhesive
- indoor installation
- Design
- Excellent
- Very good
- Decorative film ribbed glass
*****
DECO-531i
-


Repositionable film with flute glass effect
- Lighting: excellent
- Level of privacy: medium
- Glass flute effect pattern
- electrostatic
- indoor installation
- Design
- Maximal
- Excellent
- Flute glass
- -
STAT-683i
-


Repositionable film with geometric shapes
- Light passage: maximum
- Level of privacy: very good
- Various geometric patterns
- electrostatic
- indoor installation
- carres
- Very good
- Maximal
- Geometric shapes
*****
STAT-629i
You'll love it too!
18 similar reference(s)
Entrust installation to our professionals

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.
Your sample list
Free samples are limited to 3 references
-
No reference selected.
To select new samples, go to the product pages.
See my selection of samples
Samples





































