Top of the page

Ice blue glossy decorative adhesive film

  • Ref : GLOSS-4441a

basic

installation inside / outside

152 cm

The width corresponds to the width of the roll.

On this product, the width of the roll is : 152 cm.

Need help?

Add 1.5 ml and benefit from -3%.

27,13 € or € then 2 x €

Vos créations ou logos imprimés sur du film !

Imprimer ma création

Nos graphistes adaptent vos créations ✨

Paiement en 3x1ère mensualité aujourd'hui

suivi de 2 mensualités
Soit un total : Dont de frais

Also available in

Detailed description

Apportez une touche de modernité à votre décoration avec notre film adhésif décoratif bleu glacial brillant. Sa teinte intemporelle crée une ambiance à la fois élégante, apaisante et contemporaine. Parfait pour donner une nouvelle vie à un meuble ou rafraîchir un plan de travail, ce revêtement vous permet de transformer votre intérieur ou extérieur facilement, sans avoir recours à de gros travaux.

Designed for both indoor and outdoor use, this film can be applied to smooth surfaces in good condition, such as furniture, worktops and credenzas. Thanks to its Airflow adhesive technology with honeycomb structure, air escapes easily during application, for a bubble-free finish and professional results.

For optimum hold, clean the surface thoroughly with a clean cloth and soapy water before laying. Be sure to remove any dust or residue that could compromise adhesion. Maintenance couldn't be simpler: use only hot (not boiling) water and a pH-neutral product. Avoid detergents or abrasive products.

This film has a protective film. Remember to remove it once the film has been applied.

This film has a durability of 6 years, depending on the quality of the surface and its maintenance.

Want to see how it looks in your home before you decide? Order a free sample to make the right choice with confidence.

Référence produit : GLOSS4441a

See more details
Technical data Installation instructions

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Tuto: need help with installation?

Tools for easy installation

Quel que soit votre projet, les outils et accessoires de pose proposés par Luminis Films, seront grandement utiles pour la réussite de votre application ! Film adhésifs, électrostatiques, revêtements décoratifs... à chaque produit son matériel de pose associé. Grâce à ces accessoires, offrez-vous la possibilité de poser vous-même votre film ou revêtement Luminis Films et obtenez un résultat net et précis en suivant tous nos tutoriels de pose !

** Unit price for the purchase of the largest quantity.

Highlights

  • Gloss finish
  • Smooth touch texture
  • For furniture
  • Quick and easy to install
  • Alternative to paint
Preparing an order in the workshop

Made to order in our workshop in France

Nos produits sont imprimés et découpés dans notre atelier, à Villars-les-Dombes. Nous proposons des collections exclusives avec des designs créés et imprimés dans notre studio. Chaque produit commandé sur notre site est réalisé aux mesures du client sans possibilité de rétractation. La couleur perçue peut varier suivant les écrans. Avant de passer commande, testez nos échantillons gratuits ! Et évitez ainsi de ne pas être satisfait, ou de vous tromper 😉
Demandez vos échantillons gratuits !

Frequently asked questions

  • How to install adhesive coating yourself?

    All the steps and tips to follow can be found in our article "How to install an adhesive coating?"

  • Can I put adhesive coating on my worktop?

    Yes, it's possible. Our coatings are thick, moisture-resistant and very easy to clean. There are a few precautions to take, such as using trivets. Find out more in our blog post "Can adhesive flooring be installed on a kitchen worktop?"

  • Can the adhesive coating be removed without damaging the furniture underneath?

    You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.

    Our tip for removing adhesive coatings:

    • Start from a corner and pull fairly firmly
    • Use a release solution to cancel out the glue's action
    • Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.

  • Can adhesive coating be applied to a raised surface?

    Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.

    If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.

  • Can adhesive coating be applied to tiles?

    The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.

    For a more aesthetic look, there are two solutions:

    • Smooth the surface with a smoothing compound beforehand
    • Cut tiles to size and reapply a clean grout over them

  • How do I apply adhesive coating in corners?

    For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".

Voir plus de questions

Vous aimerez aussi !

14 similar reference(s)

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references -

No reference selected.
To select new samples, go to the product pages.

Send my request

See my selection of samples

Samples