Top of the page

Neutral one-way mirror film stainless steel

  • ***** / 5 See reviews
  • Available

  • Product number : MIROIR-109i

Made to order

Add 1 ml and get-3% off

19,99 € or € then 2 x €

Highlights

adhesive

  • Preserves a good part of the brightness for light passage: very good
  • Protects from 10 metres away
  • Neutral stainless steel colour: more discreet result
  • Suitable for single and small double glazing
  • Durability up to 15 years
Read more
Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

Detailed description

This one-way mirror film allows you to maintain the transparency of the glass while preserving your privacy. It lets you see through your glass without being seen. From the outside, passers-by see a mirror, and from the inside, you keep your view to the outside. So you can cut out discreet glances without darkening too much. It's also an opportunity to reject 99% of UV rays and combat glare.
One-way mirror film plays on the phenomenon of light balancing: in response to stronger light, the film becomes a reflective screen. It reflects the image on one side like a mirror, while retaining the transparency of the glass on the other. This means you can see without being seen, and it works well for far-away viewers from a distance of around 10 meters.
The neutral tint of two-way mirror film alters the exterior façade very little, protecting you discreetly. This advantage limits problems with condominiums and neighbors.
The solution offered by curtains and blinds is not always suitable for the rooms concerned, and results in a significant loss of light. Two-way mirror film offers protection for all glass surfaces where you want to retain natural light without allowing views inwards.


Highlights:
- From the outside, a perfect mirror
- From the inside, a total transparency
- Allows you to see without being seen
- No maintenance required


Durability: 10 years for vertical application in Central Europe.


Important notes: For a better view of the films, please contact us to request a free sample.
Bear in mind that the mirror effect appears on the brighter side. The mirror effect is reversed at nightfall, and no longer guarantees protection from prying eyes. Shutters or blinds can compensate for this.
The surface to be bonded must be free from dust, grease or other contaminants. Some materials, such as polycarbonate, can cause bubbling problems. A compatibility test is therefore recommended.

This mirror film is to be applied on the inner side of your glass. If it is safe for a single pane, you can not apply it on a double pane of more than 1.2m ² at the risk of thermal shock. In case of doubt, do not hesitate to consult the technical data sheet or to contact us directly.


Référence produit : MIROIR109i

See more details
Installation instructions Help with measuring Technical data

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Made to order in our workshop in France

Map of France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Preparing an order in the workshop
Preparing an order in the workshop

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be very useful for the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application material. Thanks to these accessories, give yourself the opportunity to apply your Luminis Films film or coating and obtain a clean and precise result by following all our application tutorials!

You'll also like

11 similar reference(s)

What our customers say

  • *****

    Il y a 1480 jours

    Very effective product without altering the exterior appearance of the house. The film did a great job of concealing the interior of the house as seen for 100 meters along the entire length of the street up to 3 meters away, while still letting in natural light and views to the outside. Very easy to apply and a great success for a beginner.

  • *****

    Il y a 1487 jours

    A little tricky to cut to the size of the window, you have to wet the glass well. The result is fine.

  • *****

    Il y a 1667 jours

    Meets expectations and easy to use. Well written installation instructions.

  • *****

    Il y a 1712 jours

    Nothing to add to what I said.

  • *****

    Il y a 1712 jours

    High quality, easy to install

  • *****

    Il y a 1896 jours

    Good product, relatively easy to install

  • *****

    Il y a 1942 jours

    Because the website is well designed, simple and practical.

  • *****

    Il y a 1983 jours

    Very good. Nothing to criticize, thank you.

  • *****

    Il y a 2043 jours

    Very complete instructions and easy to install. Good product rendering, as described.

  • *****

    Il y a 2104 jours

    Nothing to say, I am very satisfied with my order.

  • *****

    Il y a 2715 jours

    Apparently it's a good product.

  • *****

    Il y a 800 jours

    .

  • *****

    Il y a 1341 jours

    I'm happy with the delivery time. All I'm waiting for now is to install

  • *****

    Il y a 1647 jours

    This film is exactly what I expected

  • *****

    Il y a 1715 jours

    Nice, use the company's products to avoid unpleasant surprises.

  • *****

    Il y a 1775 jours

    Not a total mirror effect. But it's satisfying enough. We're safe from prying eyes.

  • *****

    Il y a 2587 jours

    Very good product I recommend it for all people who want this screw protector for life.

  • *****

    Il y a 2600 jours

    Satisfied with the product. Privacy screen, but not easy to install.

  • *****

    Il y a 1292 jours

    Rather difficult to install, but a good product

  • *****

    Il y a 1749 jours

    I chose this product for a little privacy during the day.

    You can see a little less at home with this product.
    But don't buy it thinking you won't be seen at all, because even in my hallway with a window, you can see from outside.

  • *****

    Il y a 2096 jours

    A little disappointed by the reflectivity, I thought the adhesive would be more opaque when viewed from the outside.

  • *****

    Il y a 1938 jours

    Small grains on the paper... The result is far from perfect, even if the mirror effect works.

  • *****

    Il y a 2274 jours

    The film is good for keeping out prying eyes, but only during the day, and from a distance. If you turn it on at night, you see everything, and if you look closely, you see everything.... And from the inside, the glass looks all dented. I don't recommend this product.

  • *****

    Il y a 2649 jours

    Complicated installation, no instructions for the product ordered.

  • *****

    Il y a 286 jours

    No after-sales service if installation is unsuccessful.

    Commentary Luminis Films - 2024/04/02

    Hello, Film doesn't create bubbles on its own. This may be due to a lack of cleaning of the glass or a lack of marouflage, which leaves too much moisture under the film. Under no circumstances can we be held responsible for faulty installation on your part. You then asked us for an after-sales service price so that we could carry out the installation ourselves through one of our partners, but you asked us to apply a price that would mean selling at a loss, which I think you understand is not legally possible. We're ready to make a gesture by offering you a discount, but don't forget that you're totally responsible for the installation error! Sincerely, the Luminis Films Team

  • *****

    Il y a 513 jours

    Super hard to put on the 1st one I messed up I folded it so it died and the others I did everything right but there are air bubbles, I used the 6€ squeegee but it died and made bubbles as a result. And on top of all that, I've noticed that at certain times people from outside see us all the same.

  • *****

    Il y a 741 jours

    Does not work transparent film throw away

  • *****

    Il y a 1096 jours

    Poor quality film. Packaging is inadequate.

  • *****

    Il y a 1188 jours

    This film is neither one-way nor mirrored, almost 40 euros spent for nothing.

  • *****

    Il y a 1189 jours

    Mirror effect not effective at all

Frequently asked questions

  • How do I apply window film?

    With a little patience and attention to detail, and by following the installation instructions carefully, you can install your window film yourself. For large surfaces (bay windows, for example), we recommend two people.


    Find out how to apply self-adhesive films in this article.

    Discover the electrostatic film installation tutorial in this article.

    If you don't want to do the installation yourself, don't hesitate to ask for a quote.

  • Should metallized film be applied indoors or outdoors?

    We recommend applying a metallized film to the outside of the glass. The film will be more effective, and your glass will be protected from any thermal shock.

    Don't panic: our films are designed to withstand the vagaries of the weather over time.


    If you cannot apply your metallized film on the outside, you can apply it on the inside in the following cases:

    • Non-laminated single glazing
    • Double-glazed windows less than 1.2m² in area


    Good to know: These precautions must be taken to limit the risk of thermal shock, but there is no such thing as 0 risk. Also, there is no contraindication to installing a transparent film on the inside.

    If in doubt, contact our advisors.

  • How do I remove my window film?

    Just pull at a gentle angle. If you have electrostatics, it's even easier.

    Here's a tutorial on how to remove adhesive window film.

    You can also find out how to remove and store your electrostatic window film.

  • Does mirror-effect film protect against heat?

    Yes, mirror-effect films automatically protect against heat. Protection varies according to shade. The heat protection properties of mirror effect films are given in the technical data sheet.

  • Does the mirror effect film work at night with the lights on?

    No: the mirror effect always occurs on the brighter side. If it's brighter inside than outside, the mirror effect is reversed.

    By the way, there's no such thing as a one-way mirror effect film that works at night with the lights on.

    To find out more, visit our article "Does the one-way night mirror work?"

  • Is the brightness of a room affected by mirror-effect solar film?

    Yes and no; it's a fairly subjective criterion.

    Technically, the more tinted the film, the greater the impact on room luminosity. A very light film, on the other hand, will have virtually no impact.

    On the other hand, your feeling of "loss of brightness" will depend on :

    • variations in external light
    • your visual acuity
    • your expectations in terms of brightness

    The best way to answer this question is to ask for free samples and test them on your windows! 😉

  • Is mirror-effect film dangerous for birds?

    The reflection caused by the mirror effect can actually confuse birds. For this reason, we offer anti-collision stickers. Their purpose is to warn of an obstacle, and thus change the bird's trajectory.

  • Does the color of the film affect its technical characteristics?

    Yes and no. The color of the film is purely aesthetic. We would like to point out, however, that the "Silver" colors are the most effective in terms of face protection.

    To see the characteristics of a film, we invite you to read its description and technical data sheet.

  • What is thermal shock?

    Thermal shock is a reaction that occurs when there is too great a temperature difference between the glass and the surrounding air. This can cause cracks and damage to your glass.


    Thermal shock can occur, for example, if you apply a dark tinted film to a large area of double-glazed glass on the inside. The glass will overheat, and may break.


    To avoid the risk of thermal shock, we recommend outdoor installation.

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references -

No reference selected.
To select new samples, go to the product pages.

Send my request

See my selection of samples

Samples