Top of the page

Semi-reflective one-way mirror film, medium silver

Best sale

adhesive

indoor installation

The width corresponds to the width of the roll.

For this product, the roll width is: cm.

Need help?

Add 1 ml more and benefit from -3%.

18,14 € or € then 2 x €

Your designs or logos printed on film!

Print my design

Our graphic designers adapt your creations ✨

Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

What our customers say

  • *****

    Product identical to sample and as requested

  • *****

    Very good product, a little difficult to install.

  • *****

    No comment to say

  • *****

    Impeccable, sufficient discretion, meets expectations.

  • *****

    Very good product. Installed by 2 people.

  • *****

    Facile à poser Réduit bien le vis-à-vis sans trop réduire la luminosité

  • *****

    Fast, well packaged product, instructions for use, film not too complicated to apply on small surface even if you are a beginner. Very good

  • *****

    Easy to install and effective.

  • *****

    assez facile à installer...comment éviter les poussières qui se collent pendant la pose résultat très satisfaisant

  • *****

    CLEAR

  • *****

    a voir dans le temps bien prendre son temps pour la pose mais le résultat est fidèle à la description

  • *****

    Products a little low-end

  • *****

    Good product but still reduces brightness. It's a pity that the cut was not made to the exact size requested.

  • *****

    livraison OK mais le film ne semble pas rejeter la chaleur comme prévu...

  • *****

    Very disappointed, too many defects in the set-up

    Commentaire Luminis Films - 12/03/2024

    Hello, We can understand your dissatisfaction, but please also understand that we cannot be responsible for the installation of the film, as this was done by you. Nevertheless, I invite you to send us photos of the rendering by e-mail so that we can see whether or not the installation is reparable and advise you on this point. Sincerely, the Luminis Films Team

  • *****

    Very difficult to apply because once it's on, it's impossible to put it back on properly. As a result, I have a lot of bubbles. I wonder what state my window will be in when I take it off.

    Commentaire Luminis Films - 03/02/2024

    Hello, You've chosen an adhesive and an electrostatic product. Which film are you talking about? Please do not hesitate to contact us directly via our contact form on our website or by phone for further advice. Best regards, The Luminis team

  • *****

    Incomplete order, missing 3 custom film panels

  • *****

    Poor quality I am extremely disappointed, application with bubbles and the result was not up to par. So I threw away an unused one and took off the one that had been applied. Waste of time and money.

  • *****

    From the outside, except with a lot of sun in the back, the film does not hide anything.

  • *****

    je n'ai rien aime et je ne recommande pas ce produit a moins d'être professionnel dans la pose de film

See more reviews

Detailed description

This clear one-way mirror film protects against distant viewers. For a distance of more than 15/20 metres, a semi-reflective film is sufficient and allows a good transmission of natural light. It works through the play of light balance. In reaction to stronger light, the glazing is transformed into a mirror, while on the other side it remains transparent. With a clear one-way mirror film, this phenomenon works from 15/20 metres and beyond.

It is perfect for people who want to protect themselves from a weak view without darkening their interior too much.

It's important to know that this type of one-way mirror film doesn't work at night when the lights are on indoors. Once night has fallen, the mirror effect no longer protects you from outside view. It's therefore a good idea to have blinds or shutters to avoid this inconvenience.

Good to know: glazing with one-way mirror film installed indoors can heat up more. To avoid this risk of overheating, we recommend outdoor installation.

Ref product : MIRROR101i

See more details
Technical data Installation instructions Help with measuring

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Tuto: need help with installation?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be invaluable to the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application equipment. Thanks to these accessories, you can install your Luminis Films film or coating yourself, and get a clean, precise result by following our installation tutorials!

Highlights

  • Preserves a good part of the brightness for light passage: very good
  • Protects from distant view beyond 15 metres
  • Very modern medium silver colour
  • Suitable for single-glazed and double-glazed units of less than 1.2 m² indoors
  • Exceptional durability for up to 15 years
Preparing an order in the workshop

Made to order in our workshop in France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Frequently asked questions

  • How do I apply window film?

    With a little patience and attention to detail, and by following the installation instructions carefully, you can install your window film yourself. For large surfaces (bay windows, for example), we recommend two people.


    Find out how to apply self-adhesive films in this article.

    Discover the electrostatic film installation tutorial in this article.

    If you don't want to do the installation yourself, don't hesitate to ask for a quote.

  • Should metallized film be applied indoors or outdoors?

    We recommend applying a metallized film to the outside of the glass. The film will be more effective, and your glass will be protected from any thermal shock.

    Don't panic: our films are designed to withstand the vagaries of the weather over time.


    If you cannot apply your metallized film on the outside, you can apply it on the inside in the following cases:

    • Non-laminated single glazing
    • Double-glazed windows less than 1.2m² in area


    Good to know: These precautions must be taken to limit the risk of thermal shock, but there is no such thing as 0 risk. Also, there is no contraindication to installing a transparent film on the inside.

    If in doubt, contact our advisors.

  • How do I remove my window film?

    Just pull at a gentle angle. If you have electrostatics, it's even easier.

    Here's a tutorial on how to remove adhesive window film.

    You can also find out how to remove and store your electrostatic window film.

  • Does mirror-effect film protect against heat?

    Yes, mirror-effect films automatically protect against heat. Protection varies according to shade. The heat protection properties of mirror effect films are given in the technical data sheet.

  • Does the mirror effect film work at night with the lights on?

    No: the mirror effect always occurs on the brighter side. If it's brighter inside than outside, the mirror effect is reversed.

    By the way, there's no such thing as a one-way mirror effect film that works at night with the lights on.

    To find out more, visit our article "Does the one-way night mirror work?"

  • Is the brightness of a room affected by mirror-effect solar film?

    Yes and no; it's a fairly subjective criterion.

    Technically, the more tinted the film, the greater the impact on room luminosity. A very light film, on the other hand, will have virtually no impact.

    On the other hand, your feeling of "loss of brightness" will depend on :

    • variations in external light
    • your visual acuity
    • your expectations in terms of brightness

    The best way to answer this question is to ask for free samples and test them on your windows! 😉

  • Is mirror-effect film dangerous for birds?

    The reflection caused by the mirror effect can actually confuse birds. For this reason, we offer anti-collision stickers. Their purpose is to warn of an obstacle, and thus change the bird's trajectory.

  • Does the color of the film affect its technical characteristics?

    Yes and no. The color of the film is purely aesthetic. We would like to point out, however, that the "Silver" colors are the most effective in terms of face protection.

    To see the characteristics of a film, we invite you to read its description and technical data sheet.

  • What is thermal shock?

    Thermal shock is a reaction that occurs when there is too great a temperature difference between the glass and the surrounding air. This can cause cracks and damage to your glass.


    Thermal shock can occur, for example, if you apply a dark tinted film to a large area of double-glazed glass on the inside. The glass will overheat, and may break.


    To avoid the risk of thermal shock, we recommend outdoor installation.

See more questions

You'll love it too!

11 similar reference(s)

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references -

No reference selected.
To select new samples, go to the product pages.

Send my request

See my selection of samples

Samples