Top of the page

Decorative adhesive imitation herringbone fabric beige

  • Ref : TISSU-3143

comfort

indoor installation

Or enter your own measurements

Add 1.35 ml and benefit from -3%.

174,92 € or € then 2 x €

Vos créations ou logos imprimés sur du film !

Imprimer ma création

Nos graphistes adaptent vos créations ✨

Paiement en 3x1ère mensualité aujourd'hui

suivi de 2 mensualités
Soit un total : Dont de frais

Also available in

Detailed description

Redecorate your entire interior with ease by choosing this beige herringbone fabric adhesive which is the best alternative to paint!

Alternating between white and beige, the colours of this chevron fabric covering will give a touch of softness to your decorative atmosphere. A touch of vintage, this print is a big hit on our clothes so why not dare to use it in your decoration?

This beige herringbone look is also enhanced by the textured touch finish, which makes the covering even more realistic.

Please note that the direction of the rafter is shown along the length of the cladding (up to 30 metres), while the height/width does not exceed 122cm. If you want to fit an entire wall, for example, you will need to make connections.

The application of this decorative adhesive is quick and easy thanks to the "Airflow" technology, otherwise known as "honeycomb glue", which prevents the formation of bubbles and folds thanks to the micro-channels present on the adhesive part, for an exceptional result!

Durability: 10 years in interior installation (anti-cracking, flaking, delamination and yellowing)

In order to get a feel for the quality and the real look, we advise you to request a free sample.

See more details
Technical data Installation instructions

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or order a sample.

Tuto: need help with installation?

Tools for easy installation

Quel que soit votre projet, les outils et accessoires de pose proposés par Luminis Films, seront grandement utiles pour la réussite de votre application ! Film adhésifs, électrostatiques, revêtements décoratifs... à chaque produit son matériel de pose associé. Grâce à ces accessoires, offrez-vous la possibilité de poser vous-même votre film ou revêtement Luminis Films et obtenez un résultat net et précis en suivant tous nos tutoriels de pose !

** Unit price for the purchase of the largest quantity.

Highlights

  • Adhesive coating with beige herringbone effect fabric finish
  • Textured feel for ultra-realistic rendering
  • Ideal for decorating in a vintage style
  • Excellent alternative to paint
  • Allows you to personalise your furniture and walls at a lower cost
Preparing an order in the workshop

Made to order in our workshop in France

Nos produits sont imprimés et découpés dans notre atelier, à Villars-les-Dombes. Nous proposons des collections exclusives avec des designs créés et imprimés dans notre studio. Chaque produit commandé sur notre site est réalisé aux mesures du client sans possibilité de rétractation. La couleur perçue peut varier suivant les écrans. Avant de passer commande, testez nos échantillons gratuits ! Et évitez ainsi de ne pas être satisfait, ou de vous tromper 😉
Demandez vos échantillons gratuits !

Frequently asked questions

  • Can the adhesive coating be removed without damaging the furniture underneath?

    You can remove the adhesive coating, but there's always a risk of damaging the surface underneath, as the adhesive is strong. Surfaces such as wallpaper or peeling paint are the most fragile.

    Our tip for removing adhesive coatings:

    • Start from a corner and pull fairly firmly
    • Use a release solution to cancel out the glue's action
    • Use a heat gun: the glue will soften the film and the adhesive. The adhesive coating is much easier to remove.

  • Can adhesive coating be applied to a raised surface?

    Adhesive coatings can be applied to surfaces with relief, such as certain moldings. You need to master the application and thermoforming of the film, and ensure that the relief is not too pronounced.

    If you'd like to give it a try, you can test it with a free sample. Alternatively, you can call in a professional fitter.

  • Can adhesive coating be applied to tiles?

    The adhesive coating can be applied to any smooth, non-porous surface. On tiles, it's possible. You'll need to be careful with the joints, as the hollows at the joints may show through.

    For a more aesthetic look, there are two solutions:

    • Smooth the surface with a smoothing compound beforehand
    • Cut tiles to size and reapply a clean grout over them

  • How do I apply adhesive coating in corners?

    For a perfectly covered corner, follow our guide: "Successful installation of adhesive coverings in corners".

Voir plus de questions

Vous aimerez aussi !

22 similar reference(s)

Entrust installation to our professionals

expert film installer

Treat yourself to the peace of mind of impeccable results and professional installation thanks to our network of installers!
Confirm the day and time of the job with our team, so you can take full advantage without worrying about technical and logistical details.

Request an installation quote

Your sample list
Free samples are limited to 3 references -

No reference selected.
To select new samples, go to the product pages.

Send my request

See my selection of samples

Samples