Stars Note Trustedshop4.50/5.00 out of 8,883 certified reviews

Install your own glazing films: anti-heat, opacifying, ...

Image: Adhesive cleat cladding, an alternative to wooden cleats

Adhesive cleat cladding, an alternative to wooden cleats

Why opt for cleat adhesive coating?

How could you miss it? Wooden strips are THE trend of the moment for dressing up our interiors, for a warm, modern look!


Other than wooden strips or panels, imitation wood adhesive cladding can be the perfect alternative for your decor:


  • Trompe l'oeil effect guaranteed
  • No work required
  • Quick and easy to install
  • Suitable for small decorating budgets


What if you were to fall for our wood strip effect cladding? We'll tell you more below ;)

Share
Image : What is decorative wood siding -85943

What is decorative wood siding?

Would you like to decorate with wooden strips? Are you looking for a less expensive solution than conventional wooden batten panels? You don't like to work on your home?


Then adhesive coating may be a good alternative 😉


This PVC coating has powerful adhesive power for covering all kinds of smooth, non-porous interior surfaces. Thermoformable, it can be applied to flat or curved surfaces (walls, furniture returns, etc.).


It's very easy to install: all you need is a pencil and a ruler to mark out the spaces to be covered, and a good blow with a trowel to get rid of air bubbles!


On the website you can find everything you need for a successful installation, including our complete installation kit 😊


Wooden cleat cladding is extremely durable. It can last 10 years for the backing film, and 5 to 8 years for the print on the film. 

Go for the slatted wood effect in your decor!

Image : How to create a wood effect headboard -85944

How to create a wood-cube-effect headboard?

You can dress up your bedroom with a wooden slat-effect headboard 😊 Very fashionable, this decorating tip will immediately give a warm feel. It's enough to make you want to snuggle up in your sheets and stay there!


Here's our tip for achieving this:


  1. Use a tape measure to measure the space to be dressed, 
  2. Take the measurements from our website www.luminis-films.fr to cut the film to the exact dimensions,
  3. Receive the adhesive directly at home or at a relay point,
  4. Apply your adhesive yourself or in pairs: One that holds, one that maroons! 😊


Tip: for a "wow" effect, you can take the full height of the wall for a vertical headboard; the full width of the wall for a horizontal headboard.


Installation tip: Do you have a small bubble appearing? No problem! Pierce it with a fine needle, and hammer a good blow over the top to let the air escape. 

Image : How to decorate a TV corner with a wooden strip effect -85945

How to decorate a TV corner with a wooden strip effect?

Looking for a little warmth in your living room? The decorating tip of the moment: frame your TV with a decorative wood-casing effect!


This pattern will sublimate beige and white interiors. It will also complement a room with a pretty fireplace, for example. A cosy effect guaranteed!


  1. Determine the width and height around the TV,  
  2. On our website, go to the product page: MTMT-TASSEAUX
  3. Enter the custom dimensions you have defined,
  4. Order and receive them in a relay point or directly at home,
  5. Remove the adhesive from its packaging; lay; and marouflez! 😊


Installation tip: Do you have a small bubble appearing? No problem! Pierce it with a fine needle, and hammer a good blow over the top to let the air escape. 

Image : How to dress a wall with a wooden strip effect cladding -85946

How do you dress a wall with wood-cube-effect cladding?

Need to delimit an entrance room? Install an adhesive covering with a wooden strip effect!


Want to highlight a piece of furniture? Install a beautiful strip of wood strip effect siding too 😉


Whether for a whole wall, or just a small piece, it makes an immediate impact.

The principle is simple and always the same:


  1. First, choose the area you wish to cover with batten siding
  2. Measure width and height using a ruler, level and pencil
  3. Refer to the measurements on the product page for exact dimensions.
  4. Order your product and receive it at home
  5. Unpack, lay, wrap 😊

Other related issues